Adjust Tracking on your TORO TimeCutter - Mower wont go straight?

Is your mower taking wider turns than you intend? Do you feel one side of your mower is faster than the other?

Well, here's the solution to all those worries. Tune in to this tutorial to find out the 2 ways you can adjust Tracking on your Lawn Mower and get the desired speed and control.

.
.
.
.

[kschantz]

Thanks. I have a Craftsman Z6000, and this video helped. When I pushed the levers all the way forward, the mower would turn towards the left. When stationary, the left lever handle was about two inches behind the right lever handle. It has a forward facing set screw on each side, below, and towards the outside of the seat. That's what stops the forward movement of the lever. The levers have adjustment bolts similar to the one in this video that I used to line up the handles. Now, when I push the levers forward, they both stop evenly, and I move straight forward at maximum speed. I turned left and right and backed up while turning, and everything was perfectly even. I really thought this would be much more complicated, like adjusting a cable or tightening a belt. Thanks again. Now mowing the lawn will be a little more enjoyable.

[psykozombie]

Best explanation and clearest examples I've seen yet. Straightforward and to the damn point- thank you, grabbing my wrenches now! 🥰

[jandrelafate]

Thank you for making this video I have a Time cutter, and watching this video solved my tracking issue.

[HB-yqgy]

Thank you really appreciate it beats hauling zero turn back to the dealer for something simple.

[Mega]

Thank God for this video, straight to the point

[Michael-otpk]

Absolutely, love the video, mate, no BS straight to it, thank you very much.

[HB-yqgy]

H B
0 seconds ago
I just purchased the 75750 only for my home. I couldn't believe it! I almost landed in the street on a decline! I used it for 1.7 hours being very careful operating when I turn left to go back it just slides like ice down the hill. Our yard is mostly flat except for the front with a slope of more than 10% in front that I tried to stay away from. I was ready to jump off to the left. I locked the brake quickly thank God no damage!

[sixteenstone]

My Exmark Quest 42" 2014 has pulled to one side ever since it was new. But I always just thought it was tire pressure and it didn't pull enough to one side to really bother me until recently. With tire pressure all equal it still does it so I'm gonna try this adjustment next. I hope it's this easy and similar on my make and model. Thanks

[gregb]

Algorithmic engagement comment.
- Nice video.
- Excellent explanation.
- Very good camera work.

[jimenglish]

Great video. I have a Toro Timecutter 75750. Is changing the gear oil a regular maintenance item? If so, can you make a video showing how it's done? Thank you

[geoffreygalliher]

Very helpful!
Thanks for sharing this video.

[patwheeler]

Thank you! Great instruction! Really appreciate!

[saleemkader]

Thank you very good explanation and video,

[SSW]

just bought a new toro timecutter and could not figure out why one side was going faster than the other. Thank you.

[kspdt]

Can you make a video on how to adjust steering and tracking on a 2023 Toro Titan? And adjusting the hydro speeds? Thanks.

[michaelbuono]

So 11mm wrench or socket to adjust the cam bolt under the seat, or 1/2” wrench for the “throttle” under the back. 👍

[chris-ovc]

I appreciate the video.I have a ex mark and it’s the same.

[joeganusi]

You're actually taking the transaxle out of the neutral position by turning that nut on the rod. That should be adjusted with the engine running and wheels off the ground. You will tear up a transaxle by running it partly in reverse which is what that does.

[LDizzy]

I have the Toro Timecutter 50. Will you all be doing a video on how to level the deck. With the way the adjustments are made it seems impossible to get it level. It seems that the 18" rear tires it comes with are too small.

[steelwalt]

I have a 74702...where would the adjustment be for my machine? Thanks in advanced i really appreciate it 👍