How to Make ANY servo rotate 360° - EASY and FAST

This is an easy and fast way to get any servo to spin continuously 360° in both directions. This method will work with ANY servo. Every servo uses the same parts inside just in different sizes.

Thank you for watching.

See what else I am working on:

Disclaimer: I am not sponsored by any of the products I mention. Some of the above links are affiliate links, that does not effect the price you pay for a product, but I may receive a small commission if you make a purchase. This helps support my channel and allows me to continue to make videos like this. Thank you for your support!

[ghostrider]

This is how to turn a servo into a DC motor

[TeamPasanNivasa]

Right to the point with no nonsense beginning or ending video and music. This is how instructional videos should be made! Thanks a ton!!!

[huntbackcountry]

rarely comment on videos but this no nonsense deserves an A+

[mitralex]

Turing servo with positioner into just dc motor with gear box ... which you could by easily from the very beginning. Great!

[arronjones]

Oh my god! I'm off to the garage to make a winch 👌

[TheRattleSnake]

This is not a 360 mod, it is a continuous rotation mod.

[zackthebongripper]

THIS is how you make a clear and concise video!

[ptdyvyt]

I can see 2 solutions, one is to integrate a multi turn potentiometer they are generally 10 turns .
the other solution is to use an absolute encoder (AS5600) coupled with a counter (ATtiny85) to generate a pwm voltage then you may program the full tension for 5 turns or 100 turns (obviously the precision of the positioning will be less accurate with 100 turns than 5 but you will have a real servo

[supernovic]

Wait a no bs youtube tutorial? FREAKING THANK YOU MAN

[watnoudan]

Nice. But you have to mention that there is no more 0 positioning feature. Which is not a problem but something you need to keep in mind depending on what you build.

[ludviglindh]

I did the same thing with a few serves as well a while back. It's quite useful

[rolfvosskamp]

Thanks - Was helpfull to see how a servo angle limit can be removed.

[haley]

But it's also not a servo anymore, right? It's a DC gear motor.

[michaelkeandremusic]

I’m try this out. I did this few months ago before finding out this video exist and I ended up taking the potentiometer out and it just kept spinning in one direction, couldn’t control it or anything lol 😂 but now I see this video ima try it again

[ljhobbylife]

Wow this is great! I got some good ideas for this!! 👍🏼👍🏼

[bilalslama]

Thank you very much, but I want the servo to rotate 359 degrees and then stop, or to rotate ±179 degrees. In the scenario you described, the servo rotates continuously without stopping at 360 degrees.

[KikitoTejada]

And does still PID after the modification?

[saqibjaved]

Thank you for this short info video, however my servo rotated 360 by just cutting the gear part

[andyb]

Excellent tip!!! That maybe the best how to in a long time!! Thank you..

[marc]

eu quero fazer o contrario, quero usar na direcao do meu modelo porem o meu fica girando, girando, e girando, arrff, como resolvo isso? quero colocar para girar para uso na direção sem rotacao 360