Soldering Flux Paste Home made/Pinoy Diy

Pls.. Subscribe....
This is a simple soldering flux paste made at home.
its hard to soldering without a paste thats why. making Diy flux using a basic home materials

candle
cooking oil

If you Like My Content
You can Consider Donating in my** Paypal Account**👇👇👇
Link Below

Thank for watching
Bless you all..

for helping me🙏🙏🙏
Pls. "Don't forget Share like and
Subscribe😂😂😂😃😃😃😃😂😂😂😂😂😂😂😂😃😃😃😃😃😇😇😇😇

Guitar to Stereo ..watch👇👇👇👇👇👇👇👇👇👇

Diy Guitar Pedal For Pc
👇👇👇👇👇😊😊😊

Diy Steerinh Wheels👇👇👇👇👇👇👇👇👇👇👍

My fb Group👇👇👇👇👇💛

[AngelosCativangas]

Thanks for sharing..working sa projeck ko..❤

[ThirdyMacariola-op]

Nice po gumanasa thank you sa tutorial nyo po❤❤

[oPtiMuMpRiCe]

Thanks a lot ! Was searching on how to use it and was wondering where to find it then boom ! Your video showed up !

[paulrieker]

Soldering technique: Clean the Tip : small container of flux, dip soldering tip in flux, and wipe on small wet sponge. This makes a shiny tip, without contamination. Melt small drop of solder on tip. This drop of melted solder transfers heat to the item you're soldering. (If possible the tip below the work.) This heat prepares the components to receive the solder. Solder carries the contaminates away from the work. You might use much more solder than you thought necessary. -But at this price, who cares! Use a magnifying glass to inspect your work. Use alcohol to clean the area around the joint. This makes faster, cleaner joints which approach commercial quality. - (We used to say: Quality, Quality, Quality, in the voice of W.C. Fields)

[nikolajc]

I will try that, thanks for the video.

[josephchewe]

Thanks a lot for the idea you shared and I hope it will work for me.

[happymatekenya]

Will probably try it out. Thanks in advance

[kommando]

Thank you. this will save me time and cash too.

[nielsdaemen]

I just use pure parrafin wax, but first I boil of the most volatile part to reduce the smoking

[mrfluffygaming]

Maganda siya nung triny ko. Kumakapit talaga sa components. Di na aq bibili 🥰

[doc]

The best way to make liquid flux is rosin and 99% ISP alcohol

[griffinande]

Try ko to idol thank you very much idol

[ace]

you can also use yellow part of incent add to petrolum jelly.

kuya sunog na po sinaing nio hehe.

[francisyinebome]

i have not try it yet but its simple and pretty nice

[spicky]

Try petroleum jelly instead of the candle even though they are both petroleum based the need to heat is eliminated pls try love to hear your opinion tks for the

[villages]

What you made isn't flux
Flux is a mildly acidic mixture that dissolves the top oxidised layer on metal, revealing the pure metal layer underneath.
Wax and cooking oil have no acidic properties
The cheapest alternatives to store bought flux is diluted HCL or even ferric chloride. But good luck cleaning that stuff off the PCB after soldering. This is why good flux solidifies after use. It prevents further oxidation.

[ibringthelastwords]

Kami dati gamit pa namin insenso kaya pati mga bad spirits umaalis 😂😂

[Liton-mv]

Brother, why doesn't wax harden and stay soft? 😮😢😢😢

[smoke_stackz]

Meron namng flux yang solder lead mo eh fluxcored yan kahit wala yang candle wax

[etg]

Thank you for make it easier making flux.