How To Connect a T piece to a Existing PVC 100mm Water Drain

Connecting a T piece to a existing 100mm PVC water drain pipe.

[DYIIdeas]

Looks better than a snap T piece, thanks for the tip.

[DYIIdeas]

Direction of FLOW and BEDDING is critical to a successful installation!

[seanb]

Hey mate, thanks for the great video.
I'm in the process of having to tap-in a bilge pump outflow, into an existing 100mm PVC pipe. I wasn't 100% sure on how to go about it until I watched you video. You have fixed my "problem" Cheers!

[jlbush]

Why would you put the angle towards the structure? Seems backwards to me.

[antonios]

Thanks for the video. Exactly what i was looking for.

[cuttingedgeprofilesenginee]

Thanks for the video....just what I was looking looking for. well done.

[mattmoniri]

Thank you very much for your instructions.

[suzannta]

Thank you for your time in doing this video. Gracias from Mexico

[wernervlok]

Thanks for this video, very helpful. I just used your method on my own drain line. Top job!

[awaheed]

Thanks for this tutorial, helped me a lot, 👍

[pjroberts]

You could just buy a flexible equal tee. The reason your pipes are full up of soil is because you don't have stones wrapped in geotextile fabric and a geotextile sock on the pipe. Over time it will eventually block.

[bazoir]

Mate, awesome… just bought myself a couple of those rubber pipe connecters for a job tomorrow. Onya.

[jacksplumbingvideos]

It looks like you put the tee fitting upside down

[bowdendrift]

How have the clamps held up? Are they 314 stainless? Cheers

[drwhoeric]

The tees are supposed to be mounted in the direction of the water flow. You have the first one flowing towards the structure and the second one flowing upward. Sorry to be the bearer of bad news.

[johnvcougar]

Question: why not glue one side and use the flex joiner on the other side?

[Toddbaldwin]

you can get a male ended junction instead of cutting the fitting.

[snehal]

Instead of connecting coupling on both sides, can b done to one side and attach T section other end straight in to existing cut pipe

[richardglazer]

Would you need a ptrap to stop gases from coming up?

[olegbirfon-ssfs]

hi, great job done, could you please add link where from you bought flex black 70mm pipe? is it strong the pipe? thank you