How To Prime A Grease Gun (Airlock Fix)

I will show you how to fix a grease gun that is not pumping grease. Your gun may be air locked meaning there is a pocket of air in the chamber. This is a very simple fix

[occultustactical]

Your video was the only one that uses the filler plug removal method. after an hour of watching videos i came upon yours and it fixed the problem. Great job!

[Z-Man]

Thank you so much for putting together this video. It was a life saver for me trying to help my friend regrease the bearings on his camper.

[williamedwards]

DUDE!!! THANK YOU! that was what was up with mine. I followed your walk through, and sure as morning, I'm greasing up all my zircs... my rails on the drawers of my rollaway.. lubed my AR buffer spring, its 1130 at night, and Im lubing everything except the ball joints on my truck. The old lady is giving me hell! hahah, . Thank you, very much!

[JonHeckendorf]

This is the only YT video about priming grease guns that got my new grease gun to prime and dispense. I've viewed over a dozen of these videos until I stumbled upon this one. I have no idea what was done differently but this video worked for me.

[ickn]

I had to comment to hit 100.

I am getting ready to load mine and I am glad that I stumbled upon your comment on another video. Solid advice.

[RCSky]

Its so agravating doing this. The two turns out rarely works, the bleeder valve never works. Taking the bleeder valve off like you did works sometimes but it will rocket shitloads of grease out if you are not careful

[canuck.]

looks good but what is the bleeder valve on the other side for? Just asking I held it down and pumped it did nothing

[rcb]

Thank you so much for this, the only thing I could find that help me solve that issue

[jacobmoua]

Got my grease gun working cause of this video. Thanks!

[pq_deletesystem]

I did this and my grease gun exploded and wasted about 2/3 of the new grease I fed it. What did I do wrong?

[AllMyDaysFeelTheSame]

Lovely, took the filler nut out and now I have half my grease tube on my hand.
However it fixed the issue without having to do anything else

[caricaturistmac]

Save me some time and it worked thanks! I watched another video before this one and I almost cleaned it all out like it suggested but this was way simpler and fixed the issue.

[johnbowman]

Video was good. When pushing in the rod if you push the lever at base of rod it unlocks it and it will move easily.

[jamiehalifax]

So my plunger lever is extremely hard to pull back and when I do a bunch of grease comes out where the plunger goes in and the lock hole too..what's up with that ?

[stevegraves]

😊 good job on video.
Straight forward and to the point.

[genehauser]

Just liked and subscribed. Excellent video, short, sweet and it worked! Thank you.

[JonnyFingers]

Thank you! It was able to bleed the air on my new grease gun. Hand was getting tired. lol

[mysterycomment]

You obviously don’t realize the plunger has a lock release.

[Josiah_Harder]

What if my plunger isn't pushing grease to the top it feels like it moves freely within the cylinder there's no pressure when trying to depress it back in

[russellharris]

Heck Yeah 👍🏾 this worked like a champ 😤