Configuring Vlans and Trunk Port on Edge Router X

Configuring Vlans and Trunk Port on Edge Router X

In this video I show you how to create vlans in Ubiquiti Edge router x. We also tag switch0 with two vlans to create a trunk link between the edge router and a Unifi Switch

Join our discord server:

Find us on social media:

If you would like to support the channel I have an Amazon storefront below:

Canadian Amazon Store front:

USA Amazon store front:

Manually Updating UNVR Firmware With SSH

[cam]

Make sure your Unifi switch port doesn’t have ‘Traffic Restriction’ enabled - that broke everything for me until I found the setting. Video was very helpful, thank you.

[JoePelayo]

It couldn't be any more straightforward. Great information.

[ridinghigh]

Great Breakdown of all the steps for configuring VLANs. Thanks

[cpuwolf]

this is exactly what I need, very clear and straightforward. Thank you so much

[MrTKorho]

Very clear and quick video! And the specific problem of using EdgeRouter with Unifi-equipment is probably most prominent.
However: I was not able to set the VID to Switch0 switch-directed port. "Error: platform does not support this setting in switch0 Value validation failed."
(EdgeRouter PoE 5)

[RedWollip]

You do a fantastic job of explaining operation and configurations.

[ClownzRevenge]

Thank you! I had such a hard time finding the PVID in this UI...

[Alex]

Thank you, VERY MUCH.
This was JUST what I needed at the precise moment of time.

[wobbles]

Great and to the point video, Do you have examples where the ER-X is dual WAN where one is local ISP the other remote (eg DHCP Relay) where I can have SSID's configured for each ? The idea being the AP's locally are actually managed by a remote UDM.

[ybrez]

Excellent video, informative but still a quick tutorial. Thank you very much!

[nmfireman]

I would like to go from my Eero system to a complete Uni system. Is there some way I can get in touch with you to make sure I get all the right components?

[mudflat]

Sorry to be an idiot, but are you taking one cable from the edgerouter X from eth1 tagged with the two vlans 10, 20 and wiring that to your switch. And do you have to tell the switch that it is receiving vlans 10, 20 on one of the ports? Or does it just sort itself out?

[PopoyTanke]

Will it work with EdgeRouter and TL-SG108PE?

[nicknz]

Hello, I only have a Edge Router X and a AP AC lite. Internet comes in on eth0 and the AP AC lite is plugged into eth4. All devices connect to the network via the AP AC lite. Is it possible to have two VLANs set up with this hardware configuration? I tried creating two VLANs and seem to have done something wrong, resulting to needing to do hardware reset the router to set it up again as I could no longer connect to it via the Web UI via laptop plugged in to eth0.

[gglovato]

excellent, it's just what i needed

[xtrip]

can this setup be applied without a swith? AP directly into ERX with the port setup part of the switch?

[ednielsen]

So, are the native LAN and both VLANs on port 1 of the ER-X, so all 3 networks are going to port 2 of the switch? Or, is it ONLY the VLANs are on port 1 of the ER-X, hence port 2 of the switch? I want to properly setup a guest network at my house. Need a VLAN for that, but I also need to be able to access my wired network with my wireless devices.

[matthewchamoff]

I know this is a big request but I would appreciate a video on setting up a network with a USG and a Unifi switch and specifically configuring multiple segregated VLANs. And then give some "Allow" examples across the VLANs. Like allowing a Roku device etc. I've done this on Edgerouter but am moving to a USG for simplicity. Thanks and appreciate your thorough videos

[gojdff]

Can I configure vlans for the wifi networks if I have only the edge router and unifi ap plugged on an unmanaged switch?

[nicolaverna]

hi, what kind of ubiquiti network do you use? from where I can download?