Simple VLAN Configuration Cisco Packet Tracer

Vlan GUI Configuration using just five commands

[shelbygracia]

Really... This is good VLAN configuration packet. Nice video 👍👍 thanks 💕❤️

[danzon]

Thank you so much for explaining that to me. My teacher couldn't for 1 year.

[handyandyradio]

This tutorial was helpful. Thanks a lot, dude!

[sankarshanthru]

Why you gave the int f 0.0/1 In router configuration

[kevincalapiz]

When I try this steps, I cannot pass to “ int f 0/0.1”

it says invalid command /number. Whats wrong has anyone encounter same to mine?

[lord]

How about I want to separate the 2 vlans, so can't ping each others, but each vlan can have internet access. I dont want to use ACL. can I just ignore the router's setting part for adding the vlan's IP, just plugging in the router without setting. So The 2 vlans are separate, and have internet access(assuming the router to the ISP)?

[strangelman]

Impossible to hear what you said in the video, even though i had volume on max

[BeastZombie]

like here at 4:14 its just not CCNA standards to be configuring the vlans through this gui interface. The tutorial should be showing all the commands

[tyland]

You didn't write the gateway 192.168.20.1 on the router. Why ?

[UdaySingh-imhd]

could you not have done everything via cli???

[abraritcloud]

Hi sir,
When I create multiple vlans and assign ports into that vlans, than I delete some vlans or all vlans which I was created than ports are not showing in to the default Vlan. Where does it go? And how to become member of default vlan?
Please advise me with commands. 🙏

[harsharocks]

This is working when vlan is setup for the first time, but when I close and reopen the cisco packet tracer, its not working (Other systems are not reachable), what to do ?

[celestria]

how did he configure on fa 0/0.1 i keep getting invalid interface

[brijeshchaurasiya]

Not working.... even the setup is same

[divyanshkhare]

on 1:09, you write the IP address. from where did you get the IP address. I tried everything show config, IP config but unable to understand to from where to get IP address. Please guide me.

[ElsaNovita]

Simple VLAN Configuration Cisco Packet Tracer

[armandopadilla]

How can I connect a 2nd router to switch that is conectes to main router

[thktraveltour]

very informative thanks for sharing sty blessed

[jeremyramosgutierrez]

4:33 I change the mode to trunk. And the Vlan says 1 - 1005 when it should just be a 1. Can anyone help?

[jahmaijones]

int f0/0.1
int fa0/0.1
int g0.0/1
int ga0.0/1


all of these do not work in the CLI configuration anyone know why ?