Turn Windows 8 Laptop into WiFi HotSpot [How To]

preview_player
Показать описание
You can now Turn Laptop into WiFi HotSpot without using any third part software and tools.

[Updated] Windows 10 Laptop into WiFi Hotspot Easily

Follow the steps carefully to know how to create WiFi HotSpot on Windows 8 PC or Laptop.

This current tutorial is all about showing How to Turn your Windows 8 Laptop into a WiFi Hotspot without using any third party software or tools. You can do it within couple of minutes and can access Internet on your Wireless devices in the next second. You no need to have any applications called connectify or Wireless Virtual Router.

After opening, select your WiFi or Ethernet or LAN connection which you would like to broadcast, right click then select Sharing. Here in the sharing options select Allow other Network users to connect through this computer's internet connection. If you get other options here then select Local Area Network. It's better to unselect second option and click Ok.

Now head over to Command Prompt by right clicking at the left bottom corner and from the options select Command Prompt (Admin). Now follow the video carefully and enter the commands drafted above.

**Stay Connected with me**

Turn Windows 8 Laptop into WiFi HotSpot [How To]
Рекомендации по теме
Комментарии
Автор

For those who are struck on "Obtaining ip add"
Some other member had written this sol
worked for me:
"
If it does not work (keeps waiting at obtaining IP address) repeat the first step:
- go to "network connections", select the connection you want to share. Go to "properties" and "sharing".
- Deselect "Allow other users to connect through this computer's Internet connection". Click "OK".
- Go to "properties" and "sharing" again.
 - select "Allow other users to connect through this computer's Internet connection". Select the network you just created just below that. Click "OK"
- Try again to connect. Should work.
"

adityakushsolan
Автор

If it does not work (keeps waiting at obtaining IP address) repeat the first step:
- go to "network connections", select the connection you want to share. Go to "properties" and "sharing". 
- Deselect "Allow other users to connect through this computer's Internet connection". Click "OK".
- Go to "properties" and "sharing" again. 
 - select "Allow other users to connect through this computer's Internet connection". Select the network you just created just below that. Click "OK"
- Try again to connect. Should work.

Cheers!

samdewaele
Автор

after i finish typing the second line (netsh wlan start hostednetwork) and press enter it just says "the hosted network could't be started. the group or resource is not correct state to perform the requested operation." so what do i do to fix it.

CoGmanlife
Автор

thank you so much, very helpful.
Note: Perform the cmd steps 1st, then go to 'Open network and sharing Center'.
Also if it does not connect 1st time on your mobile, try again.

cl
Автор

i have a usb modem (mts mblaze). i did as you instructed in the video, set up a "local area connection* 13" and when i searched for the wifi through my phone it showed the wifi connection but coudnt connect it. it stopped on "obtaining ip address" please help

nihalpharis
Автор

Turn Windows 8 Laptop into WiFi HotSpot [How To] 

To Turn off, enter this command - "netsh wlan stop hostednetwork" (without quotes)

Thanks!

TechEmpty
Автор

Thank you so much! I've been struggling to do this for ages. This tutorial was simple and easy to follow

blackygreen
Автор

Thank you Tech Empty... I finally figured out a way after many trial and errors (Be it Basic Turning On Wifi switch on Laptop, Connected but not able browse problem, Obtaining IP...problem or Routing the shared network to the right LAN..)

It was a great learning experience :-) Thanks a lot :-)  

adithyanathireddy
Автор

Thanks for the vid
I am able to connect but my mobile device is not browsing the internet. Any ideas?

younglover
Автор

during tis my pc shows that "the group or resources is not in the correct state to perform the requested operation" error
how can i solve this

nabinpanth
Автор

This worked fine although why is the connection " Limited " ?

DutyCallz
Автор

I have the same prob as some people.. its showing wireless local area network interface is powered down and does not support the requested operation.. pls fix ths!! I was trying to share my LAN network

nirmalm
Автор

You rock! This is bloody brilliant! saved me money and effort!:)

aditi
Автор

Thank you. I tried for three times and finally it worked.
Thank you very much.

kishorkumarkarki
Автор

problem solved(switched on the wifi in laptop).. thank for the wonderful video brother...

nirmalm
Автор

Its asking for the passwrd while connecting. what will be the password for the connection "TechEmpty" ??? thank You

mrsourav
Автор

accidentally i disabled the local area connection  now i am not able to create it again by command prompt

saisrikrishnakaruturi
Автор

Very nice. But how do you set the password

eleftherios
Автор

it works well on windows 8 . thank you.

aburafii
Автор

What is administrative privilege? And on my laptop I require administrative privilege? It says you need administrative privilege!!

 

dhruvr