This is how to polish solid surface for a high gloss finish

This is how to polish solid surface for a high gloss finish.
1. Align the Novastar P320 abrasive on the pad on your Mirka® DEROS 650CV.
2. Start sanding carefully in logical movements.
3. Change the abrasive to a Novastar P500.
4. Sand again and clean surface between steps.
5. Moving to damp sanding, fit vacuum block.
6. Fit the Abralon 1000 abrasive on the vacuum block.
7. Spray both the surface and abrasive with water. Decrease the speed so the water doesn't splash.
8. Sand again and clean surface between steps.
9. Change the abrasive to Abralon 3000.
10. Spray both the surface and abrasive with water and sand and clean again.
11. Time for polish: Fit lambswool pad on the machine.
12. Apply Polarshine 10 compound moderately, shake the bottle before use.
13. Spread out the polish on the surface, do not use too much polish.
14. Set the machine to around 1000-1500 rpm.
15. Start polishing, apply moderate pressure on the machine
16. Clean the surface.

All done!