Remove Orange Peels (Step-by-Step) use Dry Sanding

You can see the orange peel and the removal process in the video, which can be done safely and quickly
#orangepeel #removal #sanding #kovax

Become a member of the community and donate to the channel.
Thanks everyone!!!

[Chavoosi]

I did a DIY job on my car, had some orange peel. Found this video, followed it step by step and got that almost pro finish. Big ups to this gent

[franksliwa]

I’ve been painting and restoring vehicles for more than 40 years. I typically will wet sand the surface and have a bit of dish soap in the water. I don’t use DAs due to the circular pattern it leaves in the surface. Everything from body work to finish is done with blocks to insure a straight perfect surface. Cross hatch sanding for body work, straight line sanding for paint…although this person is extremely skilled and the results show!!

[anthonyconti]

I would love to see a video of you showing the full process of bare metal, then primer, then base coat and clear coat … with all of the sanding steps. I think it would help people to understand more of what it takes to get a nice finish like you produce. Thanks ! And thank you for sharing your knowledge

[simonreeves]

Hi, greetings from the U.K. I’ve never been brave enough to sand clear coat with a power sander, by hand and doing it wet. However, it still amazes me how effective sanding clear coat is at producing amazing results. It seems so counter intuitive to sand your car, but wow, it works just great - if you educate yourself first!

[mrfrank]

Awesome results. As a DIYer, I don’t expect that level of perfection. I hope to at least benefit from the products and technique you demonstrated.

[curtishoward]

As a 25yrs paint and collision repair expert this fella knows his paint finishes and how to get the best from it. Although factory paint on most cars has a little texture “orange peel”. So I have to match that. But many times I have had to buff all of it out and making it mirror finish on restorations I’ve done. It’s a lot of work.

[cooperlawrence]

It took me 6 videos to find one that looked correct. Thank you sir.

[gobbel]

The Buflex sandpaper is unreal! What an amazing product. I bought a budget version of the sander and I couldn't believe the result I got with the paper. Thanks so much. Best video out there!!

[jonagius]

I usually flat down the paint by wet sanding but how you do it looks so much easier! Well done 😃

[arleneandbobpaxton]

When hand sanding, what is the best way to tell if you have if you have sanded enough, but not too much when going from the 1500 grit to 2000 grit and then 3000 grit? It is easy to know when sanding with the 1500 grit is enough but I don't want to sand too much in the next two go arounds. I have been using a 3M compound but I still see scratches so I am thinking I need to sand more or change compounds. I don't know how thick the clear is and I don't want to sand more than necessary. Thank you for any comments you may have.

[luuk_is]

Wow, i never thought about cleaning the sand paper i have always grapped a new one, this probally saves so much paper

[xpfourty]

I used to remove orange peel, but I usually use 2 or 3 step to get this result. Maybe I'll try your way to get more efficient. Thanks a lot

[ScottK]

Thank you. This video was very helpful. I was wondering which selections to make for the project I am doing. Was thinking right along the lines of the sandpaper types and grits you used. The only difference is my project is wood not metal. Thank you for explaining everything so thoroughly.

[tatmiy]

Excellent and unbelievable! What a sharp look of the piano black surface! An amazing and nice job done.

[BrokenSilvia]

Svaka cast na radu i hvala na detaljima! Uvek ima nesto novo da se nauci. Cuo sam pre par nedelja da su Mirka 650 masine odlicne i ovaj video je to zakljucio. Sad sam narucio i sebi jednu pa da vidimo kako se uporedi na Rupes Skorpio 9mm :)

[louismazza]

Wow Looks amazing, sure beats the old fashion way ( block sanding with a rubber block and a bucket of soapy water) 👍👍👍

[mannyrodriguez]

Congratulations! Perfect! Thanks for sharing your video to us!!! I now can apply your teachings for my own car! Many thanks again! From Ph.

[johnyful]

This guy knows his stuff i can tell his highly skilled because im a polisher by trade ❤

[Topcoatdetail]

Excellent and smart work. I will give it a try. Traditional wet sanding will take a lot of time for sanding and polishing.
My question is how it works for ceramic clear hard clear coats.

[suspensefulness]

question i think i like dry sanding.better than wet sanding, for a fresh 48 hour paint when should dry sand and buff?