Variable Valve Timing Code p0011 p0010 p0012 p0013 p0014 p0028 (Don't Waste Money)

Variable Valve Timing Code Code p0010, p0012, p0013, p0014, p0028 p0011 timing over advanced Variable valve timing

Let me know if this works for you in the comments below. Variable valve timing is very common nowadays for newer engines. And can cause many problems if your routine automotive maintenance is not kept up.

Don't waste your money on repairs before checking oil level and condition and or cleaning the VVT valve timing solenoids. If you have any of these diagnostic trouble codes stored in your ECM.

Also if your engine oil is in poor condition and starting to slug up I would recommend doing an engine oil flush to prevent further variable valve timing problems.

Connect with me:

The Flat Rate Mechanic. 25 year ASE Master Automotive Technician and Advanced level ASE certified. #P0011 #vvt #FlatRateMechanic  
 :
Disclaimer:
Due to factors beyond the control of The Flat Rate Mechanic, it cannot guarantee against unauthorized modifications of this information or improper use of this information. The Flat Rate Mechanic assumes no liability for property damage or injury incurred as a result of any of the information contained in this automotive repair video. The Flat Rate Mechanic recommends safe practices when working on cars or trucks with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this repair video. Due to factors beyond the control of The Flat Rate Mechanic, no information contained in this automotive repair video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

[WindsorCraftDesigns]

Thank you. I really appreciate guys like you showing us how to do things right and save money. Again, big thank you.

[emk]

My 2009 malibu with 175K just threw a CEL. Used my OBDII scanner and got the P0013 code. In all 175K miles its never used oil between changes, but just went and checked the oil it was low!! Added about 3/4 quart and CEL gone. Thanks for saving me from embarassment (or geting ripped off) at the mechanic!!!

[jorgehernandez-dill]

The first guy that has made really good sense of what he's talking about and showing you how easy it is to take out a sensor

[marktermer]

Thank you so much for posting this. It saved me a lot of time and tons of cash. A simple oil change, and the code is gone! Greatly appreciated!

[SlushGamingg]

the fact that you say dont waste money but these solenoids are usually cheaper than an oil change. Its only expensive if you cant change it yourself and rely on others to fix your car. People need to start taking some initiative in my opinion and start learning to DIY. All the information you need is on youtube and google. Why waste your money taking your car to someone else when you could do it for the price of the part. 😂😂

[bobjohnson]

I replaced mine before I had any codes. I then took the old ones and cleaned them by using a sonic cleaner.
I always change my oil and filter every 3, 000 miles so they looked pretty clean. I ran them through the sonic
cleaner twice and it did remove some light granules. After cleaning I put them into a container and filled it
up to the bottom of the plunger with oil so they don't rust. They are now ready to use if and when I need them.

[joellopez]

Hey big thank you once again bro I really appreciate persons like you that are honest sincere not trying to make a quick buck just to send you another way you could be wasting money for nothing.

[ADHD_Gamer]

I replaced my VCT(along with the 2 camshaft sensors) and I still experience the issue. what should I be checking next? runs super smooth if I disconnect them.

[PrecisionKing]

Honda never had this issue other than clogged screens, maybe other makes and manufacturers should stop producing variable valve timing crap!!!!

[farrisholyfield]

My friend ran his oil low and way overdue car started running horrendous multiple cylinder misfires on all 6 cylinders. Codes p0018 and P0022 led me to believe this was the problem. Changed oil and took it a few miles to wash off the engine at the car wash. By the time I got done and cleared all the codes it was running like nothing ever happened. This video explains what happened thanks! 2007 Hyundai Santa Fe 3.3 l v6

[ciarab]

Thank you for this! I have this problem right now with my 2013 Malibu. I was going to change out my solenoids but now that you said that, first thing I need to do is change my damn oil!! Thanks man you just saved me $$

[ramonjaffe]

I had the P0013 problem. The change of the oil seems to have helped. Thank you!

[JoelHouseDumpsterDive]

My 2005 Volvo V50 2.4i Check Engine light came on while on a trip back from SW SD to SE MN. I stopped and had the code read for free at Oreilly Auto in Rapid City, SD. P2006 was the error code for Bank 1. Since I didn’t have tools to do a solenoid replacement I scouted the web and found your post. I had an oil change done before leaving Rapid City and that solved the issue. Thanks for posting this info. I am new to Volvo’s and I’ve heard they can be pretty sensitive if not maintained properly. You saved me a lot of time and trouble!

[tm]

Thank you for sharing this video! Definitely helpful!

[wholeNwon]

Thanks. Had the problem with my Lexus. Oil clean, screens clean, valve cycled fine. Went to my mechanic, who is a smart guy. He just cycled it more times. After maybe a dozen or so, it failed. Replaced it and no problems. In retrospect, I probably just should have cleaned it more thoroughly. Will the next time!

[bbim]

Thanks for sharing , would it be possible to show how to actual clean it ??

[GWOTVET]

I was hoping this was a solution, thank you so much for putting this out there and letting us know it’s possible.

[dondon]

Great video! You are right this is the first step or cheapest step in trying to fix the p0011 code thats being thrown.. Ty

[siprecords]

I just subscribed thank you so much, curious I have the same codes Malibu 2014 P0013 POO14 I’m loosing power to the car battery goes dead

[JLZ]

I heard MAF cleaner was the safest to use to clean and not brake cleaner... would you agree? Or say they are about the same?