CODE: P0011 “A” Camshaft Timing Over Advanced(Bank 1) Hyundai Tucson 2005 VVT solenoid cleaned

#teknofied P0011 is a generic OBDII code. This means that it has the same definition for the Hyundai Tucson and Elantra as it does on any other vehicle. VVT changes the frequency and distribution of gases entering and exiting the combustion chamber. It allows the engine to act as though it has different camshaft profiles at different RPM's.

The CVVT (Continuously Variable Valve Timing) system is installed to the chain sprocket of the exhaust camshaft. There is no variation in valve timing of the exhaust cam because the exhaust camshaft is driven by the timing belt. The timing of the intake cam is varied by the relative operation the CVVT vane to the housing. The CVVT controller regulates the intake camshaft angle using oil pressure through the OCV (Oil Control Valve). As result, the relative position between the camshaft and the crankshaft becomes optimal, and the engine torque improves, fuel economy improves, exhaust emissions decrease by changing the valve open/close timing of the intake camshaft.

[malanthrop]

Screen gummed up in mine. Topped off oil and added 8oz Seafoam. Went away within 100 miles.

[MarkConwayTheBurgerKing]

Great Tutorial.
Will check my VVT, actually is free, not sticky.
Also clean filter hiding behind 14mm bolt👍

[alrifainidal]

YOU should drive the car for about 2 miles to make sour not comeback the code

[MarkConwayTheBurgerKing]

The challenge with my 2006 Hyundai Elantra, is I have replaced new VVT solenoid valve and it's pre- oil filter.
P0011 still exists.
So what's up?
Any clues?

[marcioalexcorsodesouza]

Top fazia um mês q eu tava com esse defeito após vídeo resolvi

[BrokePremiere]

do you happen to know what that screen is called? I found it, cleaned it on my tucson. Worked like a charm. Now dealing with similar p0014 on my kia and I believe I found a similar bolt. But I can't find anywhere what this is called. I want to make sure before I weld a new a bolt head to the bolt that stripped. Thanks so much

[robp]

Do you still answer questions on this video??? I have an Hyundai Elantra with the same code given but the symptoms are the older gentleman that owns the vehicle stopped for gas last night and his car won't start back Ive checked for spark and that good I've even tried a little shot of starter fluid in the breather intake to see if the fuel pump is not working and as it cranks it's only seems to try to fire on the 3rd or 4th engine rotation but it's a very slight firing any suggestions as to why it won't start

[damiondskismith]

What is that screen your cleaning called and is there one on a 2010 Elantra Touring

[chefmadewoodwork]

Can this operation be performed with the engine oil filled or would it need to be drained first?

[xavieralvarado]

Code coming up on my 2008 Hyundai Elantra I looked at the sensor tested it and it passed metal shavings in my little filter what can this mean

[jacoroos]

What obd 2 scanner did you use? I see you have answered the question before, but the link no longer works

[vincesparaney]

I've been having problems for months! I have a 2008! Same code and same diagnostic machine! I replaced the VVT and Crankshaft sensor. Then it started missing like crazy almost stalling. I never knew there was a filter there. Thanks so much man. I hope this is the problem.

[rudydaberry]

My friends car has this code and I’m trying to help her and her car isn’t going crazy or anything so I don’t think it’s a big problem. Is this the most common cause of this code?

[WalterWhite-]

I have a 07 Hyundai Sonata 2.4 engine same code replaced cam shaft position sensor still getting same code if I clean this screen do you think this take care of the problem desperate for any help you can give me

[joshuapartridge]

Hi there can any one help me, got this same code and engine it has a really bad knock intermittently, can this failure cause the intake valves to hit the piston

[Theundisputedtruth]

This wouldn’t just be a faulty camshaft sensor ?