filmov
tv
Все публикации
0:04:10
The 2-kg block B and 15-kg cylinder A are connected to a light cord that passes through - 13-58
0:05:00
If the motor exerts a force of F = (600 + 2s^2) N on the cable, determine the speed - F14-3
0:03:18
The spring is placed between the wall and the 10-kg block - F14-1
0:39:27
Drawing Shear and Moment Diagrams | Shear and Moment Equations | Engineering Statics
0:13:51
Draw the shear and moment diagrams for the beam ABC if it supports a load of 800 lb - 6-41
0:04:19
The 50-mm-diameter A992 steel shaft is subjected to the torques shown - 5-53
0:05:25
The splined ends and gears attached to the A992 steel shaft are subjected to the torques - 5-49
0:03:47
Determine the maximum shear stress developed in regions CD and EF of the shaft - 5-7
0:04:23
The solid shaft has a diameter of 0.75 in. If it is subjected to the torques shown - 5-6
0:14:06
Determine the shear and moment in the beam and then draw the shear and moment diagrams - 6-2
0:03:42
The tension member is fastened together using two bolts, one on each side of the member - 1-77
0:06:41
A 60-kg suitcase slides from rest 5 m down the smooth ramp - 13-25
0:08:07
The crate has a mass of 80 kg and is being towed by a chain which is always directed at 20° - 13-2
0:05:02
The 100-kg crate is subjected to the forces shown. If it is originally at rest, determine... - 14-3
0:05:46
Marbles having a mass of 5 g are dropped from rest at A through the smooth glass tube - 14-27
0:04:54
The 8-kg block is moving with an initial speed of 5 m/s - 14-26
0:09:58
The roller coaster car has a mass of 700 kg including its passenger - 14-73
0:03:47
The beam is supported by two rods AB and CD that have cross-sectional areas - 1-47
0:06:39
The lap joint is connected together using a 1.25-in.-diameter bolt - 3-31
0:04:09
The A-36 steel rod is subjected to the loading shown. Determine the displacement of C - 4-4
0:04:24
The A-36 steel rod is subjected to the loading shown - 4-3
0:11:09
Determine the elongation of the square hollow bar when it is subjected to the axial force P - 3-9
0:06:02
The specimen from which it was obtained had an original diameter of 12.7 mm and a gage length - 3-28
0:03:54
The elastic portion of the stress–strain diagram for an aluminum alloy is shown in the figure - 3-27
Назад
Вперёд