Volvo Maintenance Required Message Reset Quick! 2012 XC60 steps in description, easy!

It took me way too long to figure out how to clear the "Maintenance Required" message on my Volvo! Hopefully this will save some people a little time.

This should work for any Volvo with the same dash board/keyless system.

1. Get in the car with the fob and press and release the Start/Stop Engine button once.
2. Press and hold the T1/T2 button in the gauge cluster.
3. While holding T1/T2, press and hold Start/Stop until all the lights in the dash come on.
4. Release Start/Stop button.
5. Wait for yellow "i" light in center of gauges to start flashing.
6. Release T1/T2 button, there should be a beep.
7. Shut off car completely and restart, the message should be gone.

[mehmetkemalkoksal]

Thank you this was the only one that helped all the other videos didn’t work!

[diannemusca]

Thank you for this video!! It worked on my Volvo S60 2012. I wish I had seen your video right right prolly saved me time😅

[hisserver]

Thank you so much. This is the only word that I was able to work with best video ever. Finally got it to work.

[DesertRoseinLV]

2010 XC60 and it worked!! Thank you! I have watched so many of these videos and they always tell you to let go of the T1/T2 button at the same time as the Start/Stop so it would never work but your way did!!! So happy you showed me how!

[petermui]

I have tried many many times form other Youtube videos, none of their suggestions worked for my 2013 S60 AWD until I finally watched your video. For me, The different this time is without inserting the key while doing the whole processing. Thank you so much !!

[pjplays]

This worked. Make sure your foot is not on the brake when you initially push start/stop or the car will start.

[Tippinswervin]

Ight so I literally watched 2 videos previously for the same thing. They failed to show the exact button press sequence properly cuz they didn’t have a cameraman. I thought the same thing would happen here but you did sum nice editing that made the visual button press easy to understand and it worked for me so thanks

[bvnguyen]

Thanks, just tried this in my 2013 xc60 and it worked! Tried several other YouTube videos and none of them worked.

[ferds]

As a mechanic that doesn’t work on many Volvos and resetting a customers maintenance light for their oil change. I thank you very much! This worked great!

[michaeltrumbo]

I just tried this on my 2011 XC60 and it worked. Thank you!

[brandonfutch]

Perfect! Thank you.
Disclaimer 🤦🏻‍♂️ I had the door open while doing this and tried a couple times before I realized it worked🤦🏻‍♂️🤣

[jose]

Superb I tried a few with no joy but your video work much appreciated 👏👏

[micklavo]

Thank you very much! Good helpful info and very easy, Save me lot of trouble

[lateeframos]

Its so simple. I tried it and it worked. Thanks.

[loracro]

Super helpful and great instructions. It worked for me on my first try. I have a 2012 S60 T5 and this worked in less than 20 seconds. Thank you!!

[runthishit]

Worked great just like you said in the video, thank you sir

[waterskidog]

I have a 2011 xc60 and also worked for me

[larryhoward]

I just had my oul changed on my 2012 xc60 and now the i light is on, is this normal and should i do what you did or could it be something else ?

[nilslarsson]

Thanks, it works fine on my S80 D5 -07

[joanncrisher]

Hoping this works. Thank you for posting.