Teaching The Apprentice How To Install Rectangle Ductwork | HVAC Installation

— SUPPORT THE CHANNEL —

— Check out @TruTech Tools, LTD —

— HVAC TACTICAL —

— FOLLOW ME —
Instagram: @qualityhvacr

— BUSINESS INQUIRES —

— TOOLS I USE —

Shurtape SF686 Mastic Tape:

Shurtape FF100 Film Tape:

Cordless-Vacuum-Pump-2CFM?affid=38

This customer is remodeling their basement and need more head room with the HVAC ductwork. In this video we remove all the existing round pipe and install new rectangle duct. Hope you enjoy the video!!

#apprentice #hvac #ductwork

[TheModelmaker]

"Come on guys, let's work together" I was LMAO with that framing job that blocked off the vent.

[dgapp]

Square duct hanging tip: drop your hanger strap first, measure off floor up to where bottom of duct will be then make a mark on the strap. Cut it off a couple of inches below the mark and bend the strap at the mark. Do the same thing on the other side with another strap to make a "cradle" for the duct to sit on. Do this all the way down the length of the ductwork. Then all you have to do is bang a couple sections together and lift it into the cradle. Screw the straps to the bottom of the duct to secure. Makes throwing ductwork up so freaking fast and looks pro AF

[ryanscho]

Love that crimper tool! Duct's look good. I would recommend using a hard pipe 90 coming from the package unit and tapping into the main trunk lines. Either that or a square to round fitting would improve air flow

[andrewl]

I’m two months into my apprenticeship and your videos have been sooo freaking helpful.

[Alex-jooi]

That install turned out immaculate Zack! Your apprentice is killing it!

[Prkour]

I to just started my apprenticeship with a quality HVAC contractor like yourself. You sir are very knowledgeable and it’s obvious you love doing what you do! Would have loved to worm under you .

[North_Coast_Hvac]

Dude I wish I had that hoist when I was in installed rectangular ductwork. It was all done by me standing on a ladder going and Sention it up every section by section. I love following your channel because you do such clean work as I would do myself. A lot of people think because they’re going to be putting that behind a soffit that it’s out of sight out of mine but the real ones take the time and seal it up and make sure that when it’s out of sight out of mine it’s all sealed up and installed correctly

[dyershvac]

Zack bro you are 1 of the best out there my friend! You do amazing work!! Love the work! You give Hvac a good name! Take care!

[classic-hbvs]

I like this better than what I had planned for my home to do. Thanks for the idea.

[tuckerparsons]

great video! ive been installing duct work for 4 years and learned alot in this video!

[kdcustomwoodworking]

A few years ago I was hired to remodel and install kitchen cabinets plus the renos .Before me they had a couple of cabinets installed in the kitchen one cabinet was a pantry just so happens installed the pantry cabinet over the heat vent .The customer had a cold kitchen after the pantry install so to fix the cold room added a electric baseboard heater .I fixed it when I did the renos after that no need for a baseboard the kitchen was comfortable.

[c_young-hvac]

Glad to see the young man still with you . After the last video I wasn't so sure 😅

[anilpunj]

I know that feeling all too well, In my end it's always the drywall guys who just don't give a damn. They always close up returns and transfers that we mark up, luckily I've never had someone do me as dirty as they did you with that boot.

[mikemoore]

Some good looking stuff looks like your apprentice is learning just right

[Lrxxx]

Whoever did that job before made it look like complete crap im so jealous you have a lift.
Watching from Canada 👍👍👍

[judedasilva]

great quality demonstration, great detail for an apprentice. i'm an apprentice as well and this video helped me out a lot, thanks!

[leogonzalez]

Don’t ever lose that hunger hvac bro ! I’m a tech and ur approved to instAll my hvac looks very clean work

[mdubb]

That's what we call PRETTY WORK!!👌🏾👌🏾

[johnwalker]

Nice job Zack, You definitely cleaned up the crappy install that some contractor left a mess, and really liked the drill crimper for the duct, I'm going to shop around maybe get one of those, it definitely speeds up the process, Good job again.

[danottaway]

I’ve thought about the drywall lift in residential settings but I’ve never seen it in action. That’s awesome!