How to program car remote without valet button

I have an Avital 4103 remote start alarm system. The shop that installed it did not install a valet button. I had to do a work around in order to program a new remote. I found the brain for the alarm and locate where the blue connector for the valet button should be. I made a probe out of a piece of wire to touch the prongs and go through the setup like using a valet button

[mcribs]

I only came here to look at the toggle switch. I think I learned something else. Thank you very much!

[jeramybradley-realtor]

You helped me a ton. I couldn’t find the valet button as I did not have it installed. Knowing which wires to follow me led to me getting my remotes programmed. Thanks so much

[jamdown]

This video lowered my stress level.
I accidentally disable my alarm. You procedure work on my 2001 Honda accord, thanks a million

[manuelsarria]

Old video buy worked great thank you sir!

[eddie]

Thanks to you was able to get it working again. Thanks !!

[junisa]

This just made my day and saved me money… thanks!

[anextday]

Can i programme any other remotes or just the original one....thanks

[juan]

Hello, do you know why when you try to start the car remotely, the ignition sounds but it doesn't start the car on the first try, but on the second try it starts? I have already checked the ignition relay and everything is fine from the fuse box. Maybe you have a relay on the steering wheel column and that is what is causing that. It is Omega Crime Guard.

[rawhide]

I used this to program the BLUE port needs shorted -( Valet ) turn key ON within 5 sec short V once, within 5 sec HOLD V then PRESS remote fob lock / Aux then un hold V turn key OFF test