Flooring | How to Install Luxury Vinyl Tiles

Introduction: (0:00)
Pre-installation: Steps 1 -3: (0:31)

Installation:
Step 1: Determine the number of rows needed: (1:38)
Step 2: Measure and mark the width of your plank: (2:21)
Step 3: Ensure the first tile is at the bottom and right hand side: (3:03)
Step 4: Place the second tile on a slight angle against the first: (3:23)
Step 5: Determine the required length of garage threshold: (4:29)
Step 6: Cut the threshold to the required length: (4:38)
Step 7: Position the threshold against the floor: (4:58)
Step 8: Measure around the garage doors: (5:17)
Step 9: Measure the space left for the edge tile: (5:40)
Step 10: Reapply the threshold against the floor: (6:10)
Step 11: Remove threshold and apply adhesive: (6:23)
Step 12: Position the threshold: (6:35)
Step 13: Close the garage door: (6:44)

[delvaassante]

Will the tiles actually withstand the traffic and weight of cars in the garage? Can they be cleaned of that oil and soot?

[margueriterizzo]

How do you cut tile in half to start first row. What blade in jigsaw for lengthwise cuts?

[lettuce]

Do to the length of tiles, would having H joints or to evenly laid tiles be bad for floor?

[rrusie]

Is a vapor barrier or any other materials needed with these tiles for a basement installation on bare concrete slab?

[cookiedough]

Hi what's the colour name of is tiles

[asianman]

What about the black hole in the midddle of the garage ?

[davidhwang]

what is the purpose of adding the 3/8 inch ?

[Herofmine]

Is it slip resistant? I know that regular floors can be extremely slippery when it's wet.