Lvp flooring installation! #diy #flooring #hardwood #laminate #lvp #lvt #remodel #construction

[Apexjasonmorganllc]

Learn how to stagger your planks. Got that stair step going

[BiggMo]

He should be using an installers beater block and not hitting the edge directly

[JavierHernandez-kqvc]

What is the name of your machine and where did you buy it?

[Sadie-iqhd]

Is the other end of a cut piece now garbage?

[footdeco]

La finition, un détail qui peut tout changer 👍🏾

[MrsFutch]

I love that color what type of flooring/color is that?

[Caro-sp]

What’s the brand of the floor and name of the color

[healthenergy]

I want to learn this work for you
Where are you ?

[newphone]

Nice work. Do I need to leave much space on the sides for vinyl? What type of knee protectors are those?

[hiscause]

Speaking from almost 40 years in the business, I still cant believe how many of these vids I see with folks beating directly on the flooring (likely just the way they have been taught). Although this may not immediately be evident, there can be a subtle damage (even with soft hammers) to the edge which can show up later. These edges are incredibly fragile and are certainly not made to be beat on. The absolute best way to tap the flooring is to cut about a 6" piece of the product you are actually installing and use double face tape to adhere it to a tapping block. First customize the piece a tapping block by cutting out an L shaped section on the bottom with a table saw about half the width of the tapping block. Cut it about the same thickness of the flooring so that it allows the tapping block to lay flat, then double face tape the piece of stock to it up against that ledge. The ledge on the bottom will hold firmly the piece of flooring as you tap with it. Just cut the piece of flooring so that the tongue is sticking out beyond the block a bit. By using the double face tape, you can simply pull the piece off as it wears and replace it quickly as needed.This way, your flooring edges will never be compromised because it is an exact tongue and groove fit that you are tapping on. Yes, it may take a little more time, but prudence is king when you have a reputation to uphold as a flooring contractor. Remember, the Hare lost to the Turtle in the long run because he thought his speed would get him to the finish line quicker, but in the end, it cost him the overall race due to his over confidence 👍

[JW]

What would be the best way to figure what cuts you should make to not have the 2 to 3" finish piece and make it closer to the 8" recommended or will there just always be a point to where it has to end with the short piece

[jameswindom]

Why you don’t use the other scrap pieces instead of using full pieces

[sofia]

What is the name of the tool for cutting

[alyssaalyssa]

What is the tool called that you used to cutt the flooring ?

[ayayronburgundy]

How are you just smashing the ends without them breaking into a million pieces I’ve tried that and it all breaks apart I bet it looks like shit after no chance that works and looks good

[LoveYourselfFirst]

What is that cutter??? Trying to help my dad

[slippyg]

What do you do about long cuts that machine won't work on those

[burner]

Unless customer asked, don’t step your planks like this 🙈

[frankgonzalez]

The type.
Of laminated wood floor planks.You're installing.Should I be hit on the edge.. You are supposed to use a wood block on top to Compress the inner lock Tongue and grove..

[rahmankahraman]

Waste of material.
After each track, the offcut at the end is used for the new track!