How to Install a Dimmer Switch - Ace Hardware

preview_player
Показать описание
Learn how to replace a dimmer switch. As you replace incandescent light bulbs with energy-saving LEDs or CFLs, your old dimmer switch might not be compatible. You'll need a universal dimmer switch and LED or CFL bulbs labeled as dimmable. Learn basic instructions for installing a single-pole universal dimmer switch including how to use a wire stripper, using a voltage tester and connecting wire nuts.

Featured Products:

Slide Dimmer

Voltage Tester
Рекомендации по теме
Комментарии
Автор

Thank you. You're video is the first one out of many that told me what to do with the ground wire on the new dimmer when my outlet box did not have one in the wall. Thank you again.

cindyyoung
Автор

That was explained much better than Home Depot's video, thank you.

brightgarinson
Автор

Dude which wires go where and how do you ground it to itself

bayleewiswell
Автор

For the green wire, where should we connected to?
Ground wire! Where is that located? I wish you showed a closer look inside

carnation
Автор

Pertaining to the green grounding wire: dwellings built before 2011 didn't require a grounding wire on switches so if you don't have a green grounding wire then just cut the green wire or cap it off with a wire nut. If you are mounting the dimmer switch to a metal box then most likely it is grounded(bonded).

jefflebowski
Автор

Did not explain the colores which in which, , you had 3 wires in the new swich, and 2 wires in the wall! This also I wish to know where did the 3rd wire go?!

NasserAlhameli
Автор

What if the box is plastic ? What do you do with the green wire if there’s no other wires?

angelc
Автор

Can I use a dimmer switch on normal LED bulbs or do I need to use dimmable bulbs?

chuganip
Автор

My dad connects wires in these power sockets and never puts wirecaps on them. Never an issue or is it just miracle we never had an accident? Please comment 😊

yiuleung-gknq
Автор

Dont mean to be rude, but you did NOT show where to connect the ground wire when there is no ground wire to connect it to. You mentioned to attach to the box. But how? Why not show how to do that?

michael-k
Автор

I got mine today and it has 2 black and one green in the bottom. I can do 2 black to the 2 black in the wall. But what should I do with green wire one that had no wire to go to

carnation
Автор

What if the box has no ground wire for connection?

debmnmn
Автор

How to connect a switch to a duplex outlet

tammyhood
Автор

So it doesn’t matter how the black wires are hooked up

jackiroberts
Автор

He doesnt explain the wires properly, but it seems that the switch is at the end of a run, which means the power wire is fed through the lights first and then the switch at the end. I would check a diagram on that out to understand that better. Anyways if you are in a situation where your light(s) are controlled from one location you should buy a single pole switch it is cheaper and simpler. Unless you are wiring more complicated stuff or multiple switches that control the same lights (3 way switch) you will have 6 wires in your box. 2 bare wires, 2 whites and 2 blacks. The white wires are your neutrals and will most likely be conndcted together with a marettes. The bare wires are grounds, in the past i guess they didnt have these so, not sure what the code would be on this if you would have to update your wiring but techbically it will work without connecting a ground if you dont have one but I am not recommending that I would check with an electrician on that. Then you got your black wires these will be your hot wires the ones that can zap you. One should come from the breaker and the other one should go out to the light fixture. The dimmer switch should should tell you which wire connects to what. Also some boxes are plastic and some metal if you have a metal one the bare/ground wire should be connected to a screw on the metal box as well as your switch.

blackfaceturdo
Автор

My dimmer has 1 black. 2 red and 1 green

jackiroberts
Автор

I got the new switch that looks exactly like the one he's installing but the one I got has a black, a red, a red with stripes and a green wire. Meanwhile I have one black and one white coming from the receptacle :0(

runamuckretreatmccarthy
Автор

not helpful. didn't what wires from dimmer to connect wires in box..

carial
Автор

Just threw me off with the extra cord on the dimmer.

fredishabanks
Автор

Useless video unless you’re 9 years old

papawd