Ubiquiti UniFi Network Setup in 10 minutes!(Bonus Overview of UI Settings) USG UAP-AC US48PoE US16XG

Ubiquiti, UniFi Networking setup of a UniFi Manged Switch, Hardware Setup, Setting Overview & WiFi Mesh Basic Setup. With a Slow & Fast WiFi Network setup. The US-16XG is a 10Gb/s 16-Port Managed Aggregation Switch. Along with its brother the US-48-500W UniFi Switch, 48 Port 500W is a fully managed PoE+ Gigabit switch. UC‑CK is the Generation 1 Cloud Key. The AP'S where UniFi AC Mesh UAP-AC-M Indoor & Outdoor.

Patron Page, Every little bit counts and helps me make more videos for you!

I do a overview of the setup & UI settings of the UniFi Products. I set the switches up along with a Cloud key. I Go over the 10Gb Cabling & setup up with a DAC cable. Also, what most of the settings are in the UI.

DISCLAIMER: This video description contains affiliate links, which means that if you click on one of the product links, I'll receive a small commission.
FYI The Links below or Above are to Amazon affiliate account and are Paid links.
As an Amazon Associate I earn from qualifying purchases.

----Link To Items-----
Ubiquiti UniFi Cloud Key (UC-CK),White

Ubiquiti Networks Unifi AC Mesh 1167Mbit/s Power over Ethernet (PoE) White

Ubiquiti Unifi Security Gateway (USG)

Ubiquiti Network Unifi US-48 48 Ports Managed Gigabit Switch with SFP and RJ45, Non-Blocking, Throughput 70 Gbps

#10Gtek# SFP+ DAC Twinax Cable, Passive, Compatible with Cisco SFP-H10GB-CU0.5M, Ubiquiti UniFi, Fortinet and More, 0.5 Meter(1.6ft)

Ubiquiti Networks Unifi Switch, 16-Port, 10G UniFi US-16-XG, Managed, L2

UI Settings starts @12:39

LED Lights:
*Adopted: Steady Blue
*Initializing: Flashing White / Off Every 1/2s
*Factory Defaults: Steady White
*BLE Connection (UDM Only): Slow Flashing Blue
*Initialization Error A12: Strobing White / Off
*Firmware Upgrade (DO NOT INTERRUPT) : Quickly Flashing White / Blue*
*Isolated: Blue and Flashing Off Every 5s
*Locating: Rapid Flashing Blue / Off
*TFTP Mode: Flashing White-Blue-Off
*Device Offline: LED Off

Legacy Amber and Green LED Follow the link:

Ubiquiti UniFi Items:

Cloud-Key Gen1 UC‑CK .
UniFi Switch PoE+ 48 (500W) US-48-500W.
3X UniFi AC Mesh UAP-AC-M.
UniFi Security Gateway USG.
10G 16-Port Managed Aggregation Switch US‑16‑XG.

Cables Used:
RJ45 10GigTek Cables
10GigTek Dac Cables

[Lunafilms]

Great Video. Love the break down explanation.I just orders the ubiquity Unifi Security Gateway and Ubiquiti Unifi Cloud Key Gen 2 Plus. This will help me set it up. Thanks!

[TangDynasty]

Thanks for the great video! Can you elaborate a little or perhaps make a video on the "Auto-optimize Network" feature? And when the "Advance features" is enabled under the "Site" section, all the WiFi gimmicks will show up on each device, like band steering, airtime fairness, etc. Can you explain what those are as well? Thanks a lot!

[ar-bullguard]

Hi, This is a very good video to understand.

I have some quick questions.

When I saw your video that you have a Unify Security Gateway, Cloud Key, 24port Switch with UC-DAC-SFP cable connected to another XG Switch 16 port.
I would like to know if my setup will work? Because I've got USG Pro, Unify Switch 24 port, Unify AP Ac Lite. I tried installing windows Ubiquity controller software from their website and do the setup but no luck in either provisioning and Adopting any Devices.
Now i have decided to purchase a DAC cable as well as cloud key if this would help.

Will the Internet work if my laptop is connected to USG's network if i want to sign into Remote Access Account when the ISP's cable is connected to Wan port of USG?

Please guide.


Thanks in Advance.

[csmoam]

Thank you for the videos. Very helpful.

[spartan]

it such an AMAZING video i really appreciate it!! can you please explain how i can to change my ip address from 192.168.1.1 to 10.0.1.1 in USG? thanks again

[BillSands]

Great video thanks for sharing and you got a new subscriber too