Intelligent Obstacle Avoiding Robot || Step by Step Tutorial || Arduino Project

Hello friends,
In today's video I am going to show you how to make an intelligent obstacle avoiding robot. This is an Arduino project in which the obstacle avoiding robot detects the presence of obstacles using HC-SR04 ultrasonic sensor. The motors are driven by L298N driver board. The ultrasonic sensor is connected to an SG 90 servomotor to give the effect of an eye looking at both sides after detecting an obstacle, changing direction and then moving forward.
After detecting the obstacle, the robot stops , moves backward and changes direction and then goes further forward.

The links for purchasing the items are given below.

OR

Link to circuit Diagram:

Please do watch the video .Thank you...

Please share the video if you like it.

You can watch the obstacle avoiding robot with advanced algorithm in the following link. It scans both left & right and choses direction without obstacle.

❤❤❤~~PLEASE SUBSCRIBE TO THE CHANNEL TO SEE MORE SUCH INTERESTING VIDEOS & MAKE LEARING SCIENCE FUN~~❤❤❤

#arduinoproject #scienceproject #arduino

[Science_U_]

Obstacle avoiding robot with advanced algorithm by scanning both left & right

Obstacle Avoiding Robot with Bluetooth Control

[jerryrichard]

I have finished uploading the code for the obstacle avoiding robot and finish all the wires, and everything works like it should no problem of any kind, I want to thank you so much, you are such an amazing teacher, my next project is the Bluetooth Control obstacle avoiding robot.

[abduraheempk]

Bro i subscribe and like from 4 phone because your video is very amazing and your sound also 👌 ❤❤🎉😊😊

[niroulasamir]

After watching servel video we are finally able to run our car .
Thank you soo much for your tutorial.
Love from Nepal.🇳🇵

[naseemaharoon]

You are a super comment reader you reply all the comments 😅😅

[arthurgalvao]

My car works normally only when it is still connected to the computer, when disconnected it only goes forward, but does not avoid obstacles.

[naseemaharoon]

Bro i like your video i maked it but it working thankyou so much bro you need to make so many things like yhis thankyou very much ❤❤❤😊😊

[gamerbaba]

Bro thank you very much i have made it, it is working and the code is also perfect, once again thank you very much and i will ask you to pls start a project on drone.

[RONALDOSTATUS]

Thanks a lot brother😊 It worked properly. Previously I saw another youtuber video of making a obstacle robbot but it was not working then I saw your video and it worked. Thank you so much
6:40

[wreckedship]

I am using a single dc 9v battery but it is not functioning well so do you think I should just use the 4 AA battery? then will it work properly? the robot works when plugged into my pc but when unplugged the robot just stands still and the Arduino Uno light and all are working.

[ElenaEllis-mz]

Thank you so much! We were able to create this as a project and its works well!

[srinivasphysicsclasses]

Hi sir ...Thank you very much
After somany videos ..
Finally i prepared from your video..
On floor it is not moving
It works only in air

[aryagodse]

My servo motor is working but the wheels are not have connected wires as shown in the circuit diagram. Please guide me

[CousinAAE]

I successfully made this robot following your instructions, but one problem I have is the robot gets too close to the obstacles before realizing it has to redirect. I'll increase the distance number, will it still work? Wonderful instructions and I really appreciated the circuit diagram!

[srinivasarao]

When I connect usb to my laptop it's working 100% but when I remove and connect only batteries of same what u have used then only the sensor is working but it's not moving

[karthiku]

Thank you it helped me so much. Now I am buliding obstacle avoiding robot in my agriculturally based seed Sower project

[prokoloid]

Hello good day ! We are currently using 3 pieces of 18650 (vape) batteries which has 3.9V so around 12 V of battery. We are already done programming it with remote control and stuff. We are now trying to make it an autonomous driving with obstacle avoiding property. Do you think the code that you provided will do just fine? I can send the whole specifications of the parts the we used for better visualization. Thank you

[kavyasivakumar]

I can't I made it, thank you so much
Love from your subscriber 🎉

[srilatha.b]

Sir, ive checked all the circuit connections and code uploading too... I did very carefully and correctly... When im connecting it, only the uno board's light is blowing but not moving.... Pls help me with this problem, we have our science project coming soon

[Ge_Skills]

Can i use a battery box that only lets 2 batteries in. Or i will need more power. or just use the one your using.