🔥 How to FRAME Walls 🤜 Steel Framing / TINY HOUSE 7 X 4,80 ✅ Drywall

🔥 Drywall partition ▶︎ How to Build a metal framed wall 💪 PLADUR
👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇

Profiles for exterior and wet areas

These are profiles that the difference is their composition.
They are made of galvanized steel type DX51D and have a Z450 galvanized protection (except for the U Profile, so they are suitable for indoor humid areas, semi-outdoor areas and outdoor areas. Depending on their geometry they can be vertical elements (Studs) with a nominal thickness of 0.7, 1 or 2 mm, or horizontal elements (Master or Channels) with a nominal thickness of 0.6 or 0.7 mm.

▶︎ What is an OSB Board?
An OSB board is made up of several layers of wood chips glued together with pressure applied. The layers are not arranged in any direction, as it may seem, but rather the directions in which the chips of each layer are oriented are alternated in order to give the board more stability and resistance.

▶︎ What wood are used?
Mainly coniferous woods are used, among which pine and fir stand out. On some occasions also leafy species such as poplar or even eucalyptus.

[gordonagent]

Mate, just found your channel so I’m a new subscriber now but just wanted to say you must be the most practical framer I have seen, commonsense and practical and very easy to follow. Thanks for sharing

[christophermapes]

Dude's a brave man, metal framing without gloves!

[sharperone]

DUDE... You got me over here thinking im gonna get a light gauge steel frame, put some SIP panels on it, get the plumbing and electrical and interior finishes done and just live😊...

[lesbetts]

thanks for showing off your skill in fwd maybe next time show something and explain something.

[BroVinTV]

I think this is nice, it can carry loads and lateral moments but you forgot the lift force of winds during storm, I assume the floor is well connected to the foundation, I suggest to put washer on the screw connecting to the floor, and use screws with wider heads

[sqnhunterx]

I suggest he put hold down bars, threaded bars 20cm in from every corner, one down beside every window and door, and ensure there is one every 2.4 meters. These are set in the concrete and go to the roof frames and can be tightened with long threaded nuts. It is cyclone proof then. ASWD45 cyclone standard.

[feralbigdog]

i expected from the title that this would be instructional, i have questions that this didnt begin to answer, such as do the exterior studs have to all be cut to the same length like in wood framing or is it just the ends like in some videos of i saw of interior metal stud framing, where there was some wiggle room between the first and last studs, relying on the strength of the metal and the screws to hold things up? is the spacing the same as in wood framing? what is with those corner things?

[tragedyofwind]

i like the positive energy of this vid. I saw many vid of differnt way of building wall, but when it come to concrete wall, 3D printing take so much hate and crap. I think the metal work community is so much better than the toxicity of traditional concrete. I guess this is why we have so much improvement and tech on metal than concrte in construction.

[mogo]

I’m a steel framer. Your technique is ‘odd’ but i can see your skill none the less.

[yolbulucu]

the steel seems very thin. how do you calculate which thickness of steel to use? i am planning to go witn 3 or 4mm (0.16 inch)

[Omobilo]

What's the thickness of the metal in these profiles? Options I find locally are 0.5mm or 0.6mm or 1.5mm thickness for pairs: 70mm x 50mm x70mm & 70mm x40mm x 70mm

[meshedgears]

This must be at a location with no permitting required. 25 gauge steel is not considered structural even if it is made into a truss or shear panel. The connection at the screws are not considered strong enough. The fact that the truss bends at all under his weight is actually showing the weakness not the strength.. I usually just ignore videos like this, but it would be bad if someone ran down to there local big box store and bought those 25 gauge "c" channel studs and assumed they would work. I do have to admit that seeing the wood carpenter way of doing the layout was interesting, trained professionals in my area shoot the track to the floor and put the ends on first. They then snap the studs in between.... Its faster.
Most drywallers say they are considered behind schedule before they arrive for the first time.
-MG

[paulazzopardi]

loved watching this. Thanks for putting in the effort to film the process. I will build with this material. Cheers.

[backbasics]

Competence is such an amazing thing to watch😊😊😊😊😊😊

[mlord]

I learned that Stell Frame, when made in a very hot city, as steel expands at high temperatures, they say that when it cools down soon after, it creaks and makes noise in the structure of the house. Could you tell me if this is true or not, please? Thanks.

[billybastar]

Also, I, would have invested in a tack welder, especially for the beams! Belt and suspenders. Anyone with a metal garage door can relate to self tapping screws failure….100%.

[jesusvaldez]

simplemente hermoso, este video es mi inspiracion para construir dos recamaras de steel frame en un segundo piso que es de concreto, tengo demasiada teoria en construccion y he hecho trabajos menores pero me siento capaz de hacerlo yo mismo

felicidades y muchas gracias por compartir

[sercalservicios]

TIENES UNA LISTA COMPLETA DE LOS VIDEOS DE ESTA CONSTRUCCION QUE ESTAS HACIENDO EN EL JARDIN? ESTARIA BIEN VER EL PROCESO COMPLETO DE ESA CONSTRUCCION. FELICIDADES POR LOS VIDEOS, SON GENIALES

[nikmazlee]

excelent, sir. what the name of the fram sir?

[AustralianinthePhilippines]

While I enjoyed watching your video I would have liked to hear some instruction voice over as the title is "How to FRAME Walls" not watch me frame walls. Beginners like myself would benefit greatly if you could actually give some guidance and teach us rather than just entertainment value.