Thrustmaster T-LCM Pedals Not Working With The Wheel Base | Thrustmaster Pedal Mode Switch

Here is a possible fix when T-LCM pedals are not detected by the wheel base but they are working with the USB.
🔽Subscribe for 🍀LUCK🍀 in your next race:)🔽

My Racing Setup:

#thrustmaster #simracing #pedals

DISCLAIMER: This description contains affiliate links to support the channel. 🔽Become a Supportive Pal:🔽

[MrRando-cssn]

Been having tons of problems out of these pedals and couldn't figure out why. Mainly the pedals freaking out whenever I heel toed and applying all inputs at halfway with no way to stop it except unplugging the pedals.

This fixed it immediately. Thank you so much

[veltrix]

Thank you, my T3PA pedals weren't registering all of the pressure I was pressing down and thought that the clutch was the gas pedal, this fixed everything.

[golfmanv]

Thank you very much for this video. I tried two wheelbases with my T3PA pedals and they didnt work. The gas was at 20 Prozent and the brake too. I packed everything to return ist, but finally i found your video and now everything works fine. No instruction from ThrustMaster tells you this.

[yoyoguyver]

Thank you so much. I was close to returning the pedals thinking they were faulty. Had no idea about the pedal modes. ❤

[eSKAone-]

Wtf. I have the T300RS with the 2-Pedal set since 2016. I used it on the PS4 Pro, PS5, and now PS5 Pro. Since the beginning (after every new startup of the console) I had only 35% brake volume when pressing the pedal fully. First I thought it was damaged. Soon I found out I just have to push it once after every new startup. This was my routine, it worked. Today (after 8 years) I had the problem in GT7 that my car wouldn't rev up. I looked into the control settings, my brake volume was at 15% without pressing something. Thought it was damaged because also my routine didn't work after a new startup (couldn't push it to 100). Googled again. Found the tip to just unplug the pedals from the wheelbase after the normal startup calibration (when everything is running). Did it. Now everything is fixed. Even after a new startup I don't have to do anything, my pedals just work. 😂 All this hustle after every startup for 8 years (almost breaking the pedal by force). Hope it helps someone.

[yourenduranceracer]

Omg thank u so much, my dad was forcing me to send them back, thank you

[artfull_dodger__]

Help

Just hooked up my tlcm’s and changed the mode to load cell mode so the light blinks 10 times but only getting 79% throttle and brake but when I change it to the t3pm (blinks once) i get 100% on both that’s not right

[AgroDejv]

Bro thank you, i got tmx pedals and wheel and i was scared that my pedals are broken. Thank you so much😁

[isiklar]

Is it also working with my TMX Force Feedback?

[SpencerDavis]

The only trouble I’m having with my L-TCM pedals is,
They work normal for every game except for Assetto Corsa competitione the throttle and clutch are swapped and I can’t figure out how to fix it. Any ideas?

[Slowpoke-racing]

Thanks for the advice, I didn't know this.
I have set to TLCM mode but when I start the game again they revert back to the other mode, do I have to set it to TLCM mode every time?

[beebejay]

Hi.

Been trying to sort an issue for nearly 24hrs but just going round in circles without success.

I have the T150 upgraded to T-LCMs

The set up has been flawless on my Gaming Laptop (via large monitor or QUEST 2 VR) on all my Sims like Assetto Corsa, Project Cars 2 and Automolilista 2
I’ve been using them for over a year.

I am now trying to use them on GT Sport on PS4 for the 1st time.

I have checked the SW Firmware (v35) and followed all the steps including making sure the T150 is in T-LCM mode (10 flashes)

On a Console the Pedals USB isn’t required so it’s connected to the SW via the RJ12 cable.

I fire up the game and T150 SW works but the pedals and completely dead.

There are no calibration setting for them in the GT Menu, just options to configure the T150 buttons.

Nothing works, changing MODEs, trying with the Pedal USB connected, disconnecting and starting again, nothing at all.

The Pedals work 100% and I am sure the RJ12 cable works as the light blinks 10 times when I disconnect and reconnect proving it is recognised by the SW.

I’m fairly tech savvy so It’s driving me nuts (pardon the pun)

I’ve checked all the info on the TM site, re-downloaded and installed the latest FW and read all the PDF manuals.

If anyone has a simple and easy to understand way on how to make the T-LCM with T150 (or any other TM wheel combo) work on PS4 or PS5 I’d be really grateful.

Thanks

[Trext.]

Mine always does this but now it wont go out of the mode

[bigapans]

i have the opposite problem, ive bought the t-lcm pedals removable usb cable to connect the pedals directly to the pc, but every time i start acc they are not working, but they are detected as sim pedals in steering Options...

[playercmg]

How to do it without the orginal t300 wheel?

[fozzihd]

I’m pressing my brake pedal all the way down but it only shows as 40% in game on Xbox ?

[truckx]

I'm having a problem where my pedals aren't inputting anything. I have the Thrustmaster TMX with the 2 pedal set although I'm not sure what the exact pedals are called. Every single button on my wheel works fine, but my pedals aren't giving me anything at all. This all happened once I got F1 23 although I don't know if that has anything to do with it, I booted up the game for the first time and got no pedal input, then I tried my other games and still got nothing. After a while I realized they were either broken, or I had some sort of software or connection issue. I tried cleaning it using compressed air and even opened it up to see if anything was wrong or out of place. Absolutely nothing. I've had this set for about 10 and a half months and from the research I've done, the only thing I could come up with is that my potentiometers were shot. I don't know what to do if that's the case and I also don't even know how to find out if that truly is the problem. I haven't got a clue about what any of that means and I've tried time and time again to fix this problem including what this video states but still, nothing. I only play 2 games on my wheel, Rfactor2, and F1 23, so I don't know what my problem is here. If anybody at all has a potential solution or any ideas, please let me know because I've tried everything and am probably resorting to getting new pedals if I can't figure this out soon.

[TheForgottenF]

please help my tax force feed back is stuck on green but it has the pedals that already come with the wheel

[Jendajepan]

My ps4 is not registering my brake pedal, only my clutch and throttle so im gonna try it

[scytheboi]

I have the original two pedals and they just wont respond, is this a techinal issue such as the cables or is this a application issue.