How To Calibrate Thrustmaster T-LCM Pedals - Easy Guide

preview_player
Показать описание
This is how you calibrate Thrustmaster T-LCM pedals through the calibration tool.
🔽Subscribe for 🍀LUCK🍀 in your next race:)🔽

🔽My Racing Setup: 🔽

#thrustmaster #tlcm #simracing

DISCLAIMER: This description contains affiliate links to support the channel. 🔽Become a Supportive Pal:🔽
Рекомендации по теме
Комментарии
Автор

If I do this, will the data be saved and will work on the console?

Igor_fh
Автор

I’m pressing my pedals and it won’t move or anything also my accelerator keeps moving when I’m not pressing the gas

cloroxbleach
Автор

I’ve just bought these pedals and the software isn’t opening properly, any ideas anyone??

mick
Автор

How did you get firmware V2.00, my T-GT II is on the latest firmware but my TCLM pedals are still on firmware 1.82

Stevefozz
Автор

I just bought a tlcm for my t300 rs gt setup... i just use the usb cable from the tlcm to the pc ..
My brake just can 0 or 100 % ...nothing in between.
The gas and clutch is more sensitive an shows every number between 0 to 100%. What is the problem with my brake?

farfarad
Автор

Hi, there thank you for help! Is this calibration apply and if you play GT7?

bahtyarabdurmanov
Автор

zdravím, kalibrácia cez USB kábel (kábel z pedálov do PC) prebehla v poriadku, no neviem či sa mi nastavenie kalibrácie uložilo...pedále mám teraz napojené do môjhoT300 RS GT serva a servo do počítača...po otvorení aplikácie na kalibráciu mi píše "please plug a device"...som zmätený...rovnako tak primárne hrám na PS5 a chcem aby tá kalibrácia bola uložená...nejaké rady? Ďakujem!

nadao
Автор

My TLCM work perfectly in this calibration software on pc, but when i plug them into my TS-XW base connected to xbox series x, the brake pedal doesn't work at all and when i push the gas pedal to 100% the brake is going to 25% simultaneously, that's just weird, i don't know what to do. The base is set to TLCM mode (red light blinking 10x). Any help? 😬

RogstaGamez
Автор

there used to be a tool like this for the t3pa but i cant find anywhere

doubtingmean
Автор

Im pressing my pedals but nothing shows up and i can't calibrate them i alos can not change the brake force everytime i change it, it just goes back to 0%. Do u know a fix?

TheodorAndersen
Автор

Are these pedals load cell when plugged into usb or do they have to be plugged into the wheel base?

kevinstraver