Toyota RAV4 ABS TRAC VSC Warning Light FIX - C1223 C1241 C1249

preview_player
Показать описание
If warning lights for ABS (anti-lock braking system), TRAC (traction control), and VSC (vehicle stability control) come on simultaneously and stay on until the engine is shut off, but do not come back on when the engine is re-started, try the fix in this video. This issue seems to be common across many Toyota vehicles. Diagnosing with scantool gives stored chassis codes C1223 C1241 and C1249, even if the warning lights are off. These are ABS fault, low or high power supply voltage, and stop lamp switch circuit open. The real culprit is the stop lamp switch aka brake pedal sensor. Replacing the switch solves the problem in most cases.

Рекомендации по теме
Комментарии
Автор

Thank you, I saved 205 dollars that they were charging me for this service.
I did it my self thank you again.

walkyttour
Автор

Very helpful as usual .Having the same issue in LEXUS RX 300.

cezaryrenoir
Автор

I've noticed when it gets rainy outside my light cluster turns on.

I'm guessing a fuse getting wet?

DaveShindig
Автор

Is it dangerous to drive like this for 1864.114 miles Is it safe for ten days trip

BudPagamdulam
Автор

What are the symptoms of the car? My car almost has no idle. 3.0 v6.

jacoe
Автор

This happens to me along with the power steering, airbag and more recently and weirdly, the seatbelt light flashes despite being buckled. There's nothing I can do to trigger this. I don't know why it's doing it. There's no codes. Battery and alternator have been tested multiple times and they're fine. Dealership won't look at because the lights weren't on when I brought it in. I'm not sure what I'm supposed to do.

taurus
Автор

I just switched out the battery yesterday. Could this be it and how do I fix it?

lyneck
Автор

My 2007 rav 4 has same lights locked steering wheel replaced the sensor still hasnt fixed it should i wait 30 mins or bring it to a shop

daviljohn-lnju
Автор

I have a c1241 code, low or high voltage. I don’t think it’s gonna be my brake pedal switch. Do you have any other recommendations?

conflictedshotz
Автор

Hey, i just ordered the part and im going to try to replace the new one :) cross my fingers

udonword
Автор

My 2007 RAV4 has the same lights on and the cruise control stopped working. I have spent $1, 200 and each time I pick it up everything works fine for about 20 miles, then the lights come back on and cruise won't work. What the hell did Toyota do to these RAV4's? Now the mechanic says to let him replace all the sensors on the tires. Damn, there goes another several hundred dollars. Any suggestions before I run the damn thing over a cliff?

Dr.Pepper
Автор

Hello, i just order this part and hope this will solve my problem, warning lights i get is : check break system, check abs, check vcs and det handbreak lamp is red! do you think the switch wil solve my problem ? i can drive for like one day and the day after the lights come on, somtimes more often.

udonword
Автор

Hello. Brother, do you know how to turn off the traction from the side of the car engine or through the fuse, because my car does not have the traction button

A-
Автор

My sister’s 2004 Toy Rav-4 has the same problem. Today I went to the dealer to look for the brake pedal sensor and the guy didn’t know what I am talking about and couldn’t give me the part, instead he gave me the Stop Lamp Switch Assembly, can you help me to order the correct part of brake pedal sensor or switch? Or where can I order it from? I even showed them this video and they still couldn’t give me the part.

dr.vangchannel
Автор

hello i have some issues with my toyota urban cruiser. TRAC, VSC, ABS, 4DW lights blink together i looked too much forum sites but i cant find the problem. what do u think? thanks...

omerdemircak
Автор

I have the same problem on same year rav 4. The code i show is Cat code

michaelgeorge
Автор

Mines doing it with the key out and car is humming then kills my battery any idea?

SsShadowbaneSsS
Автор

My 2008 rav4 4 cylinder has the check engine, VSC, and Traction Control light on. Had codes read and was told misfire in the 1st cylinder. Replaced the spark plugs and seems to have fixed misfire, but it’s stuck in limp mode. How could I fix that?

alliramsey-qhvl
Автор

you said at the end of the video, you" hope this fixes the issue" Just one more reason I would like to have a 1989 VW Westphalia with no stupid idiot lights to annoy you, for no apparent reason.

brucewmclaughlin
Автор

Hi. Has this fixed the problem with the lights?

JustynaGorka