Understanding Camshafts – Part 1 (Lobe Shape)

The camshaft is to an engine as a conductor is to an orchestra. A lot rides on having the proper camshaft selected for your engine application. In Part 1 of this Steve Tech on camshafts, Steve Morris discusses lobe shape and the importance of choosing the right shape for your expected performance goals. Stay tuned for Part 2 & 3 on camshaft design.

[rodneybyrd]

Harold Brookshire (Ultradyne Cams, RIP) was a genius at that closing ramp on his lobes, which I think were almost all asymmetrical. Even his early work at General Kinetics and later work at Lunati (VooDoo, etc.) had those carefully calculated closing rates.

[craig]

Absolutely, @50 & @200 numbers are the biggest factors. The time(duration) that the valve spends in these areas is huge as compared tonthe time the valve spends in the lift area say .100" either side of full lift. Hence, head flow number at peak valve lift is not as important to think about as flow figures within the range up to 'about' 80% of peak lift.
Great vid 👍

[lightmetalinc.]

Thanks for the insight Steve, looking forward to the next one!

[jhook]

I really enjoy the camshaft profiles differances per application..Would you have or know who would be able to grind a cam with the LS firing order 4-7/2-3 swap for 572 mopar wedge

[VGHCX]

Good video. So, how many degrees of rotation does a camshaft stay at maximum lift? It seems like it is there less than 1 degree of rotation. Help me understand please.

[edwardchascsa]

This is from Steve Morris engines u tube. Good stuff. Check him out

[hemi.villain]

I'm new 2 your channel quick question for you I have a 2007 Chrysler Aspen 5.7 Hemi I'm looking to put a cam in there from the Jeep Grand Cherokee with tha 392

[VGHCX]

Can anyone answer this question? How many crankshaft and or camshaft degrees does the valve stay at peak lift in an engine? It seems to me based off the lobe designs the valve stays at peak lift only 1-3 degrees at most. And that is if using a roller cam.

[JCnordic]

So an rv cam for efficiency what would be a lift increase over a oem cam?

[beachboardfan]

Is there no mean of dampening the bounce?

[steph]

Who can I go to when I'm ready to get an asymmetrical cam grind for ls?

[camshaftcasting]

Cam profile designer here. I get so frustrated by these “tech” videos. The video is called “lobe shape” which means the profile. Then he tells you nothing about how it is designed. I wonder should I make a video about how a real world cam profile is actually designed? Would people look at it? I’m no YouTube jockey but the lack of real information and the surfeit of superficial info is frustrating. Does it frustrate others? Or are people content to know “some guy at comp cams does it on a computer”? Tell me.

[MrTech]

So Ive just bought a pair of reprofiled camshaft’s for my Vauxhall XE engine and they are sold on a fast road basis and fit to the engine on it’s standard timing markings because the clearance are said to be safe. Out of interest before fitting, i measured the lobes on my original cams and they were 44mm, but the upgraded cams had shorter lobes at 40mm. Now I would of thought the upgraded cams would have higher lobes, or atleast the same size for valve lift. Can anyone explain why this is? Do the upgraded cams give me more valve opening durations over the standard ones? Turned engine over by hand several times and it feels perfectly ok as in no valves colliding with the pistons. I’m just a bit curious. Piper cams they are and claim to give a power increase of 12bhp. I’ve already got a direct cold air duct and a large bore 4-2-1 exhaust manifold with a 2” straight through pipe. I’m excited to see how well the power gains with be. But very curious about the lobe sizes being different. Also, it occurred to me that is it necessary to change the valve springs to accommodate the upgraded one or would the standard springs be ok?

[mikes.]

The bounce will happen coming off the peak or not at all unless yoyr spring is weak and you have resinance, which means weak valve springs.
While we are discussing lobe geometry, why since the invention of roller lifters in a chevy engine did the following ramp mirrior the leading ramp?

[salvatorehayes]

Does Anyone Know If A .315" Lobe On A 252 Advertized Duration (200 @ .50") Is A Harsh For Rhe Valvetrain? Its In A 1.65 Rocker. This Is A GM 3800 V6 (231CuIn). Im Specing A Camshaft And Im Constrained To Very Short Durations To Keep My Overlap In Check For My Desired LSA. Its A Daily Driver Turbo Car.

Originally I Speced The Intake Lobe .344 With 252 Duration (202 @0.50") But I Figured That Was Far Too Agressive On The Valvetrain For A Daily Driver.

[PeggyParrow]

You must have a reverse rotation cam ! The way my cam runs is clockwise, so therefore you are showing the opening ramp on the wrong side, the cam turns to your right, therefore it contacts the lifter on your right! Think about it, before giving false informatiom.

[townsendliving]

Someone should get a high speed camera and set up a test rig to show the bounce, I'd like to know how someone figured out about the bounce, how the hell would you know that. Be cool to see it in high speed

[ChielScape]

I hope this series ends in the actual math and formulas that describe the entire lobe. Duration at X lift doesn't tell me enough about what a cam does.

[johnshackelford]

1970 340 374 hp Tommy Bosher look in the mirror say Dodge Chrysler Plymouth DART 3 times.

[greenmanyyy]

Nothing about a camshaft if "OBVIOUS" to anyone who decides to watch a video, that alleges to explain how they work.