How to Re-Key or Change the Locks in a T1N Sprinter Van Door

A member and long-time supporter wanted to replace all the lock tumblers in his old van to avoid breaking a key. This would not have been my recommendation since the tumblers are not usually our troubled area, but he was able to order tumblers matching his V.I.N. so the same keys will work and had the parts in hand before we discussed other options. The process is the same if changing keys, as long as you have keys for old and new tumbler sets.

Support the channel by becoming a Patreon member:

---- AFFILIATE LINKS, Recommended Fluids and Tools ----
Some of our favorite products can be found as Amazon Affiliate Links at:

---- MISC LINKS ----

[michaelberlin]

Florida van man; undefeated video maker

[deckland]

Thanks for the great video. I have a mercedes vito. And I could not find any video that could show me how to change locks. Finally found yours.

[hakimayal]

Thank you. My vehicle is a 2005 Mercedes Sprinter 313 CDI, its system was different. As preparation, I bought the key hub in this video

[bille]

Thanks for the video. I recently had the key cloned and after using it to unlock the side door, the lock mechanism stopped working. The locksmith said the actuator is probably bad. But, I noticed that it felt like the handle itself was broken. Sure enough the plastic around the cylinder spring was broken. So, I just replaced driver side external handle with a dorman. I re-used the existing lock cylinder. Your instructions were spot on. The lock mechanism seems work both with key or fob, and there is a bit more resistance when it's unlocked (as I'm used to feeling) but, the door won't open. I also tried disconnecting/reconnecting battery and lubing door side lock linkage. Other doors still operate as expected.

[jrinventormusic]

Thank you for showing me this! Another successful operation

[jonnrush]

great stuff, very helpful, thanks! ❤

[jhoanmrcruzrodriguezcruz]

Hola amigo donde se puede comprar los repuestos que cambias en el videoclip

[Looponfilms]

Go on impress me..do it WITHOUT A KEY😂

[grdstudios]

FVM you showed the ignition tumbler. Will there be a video installing that one?

[cs]

Where did you order the key and barrels from? I would like new matching lock and keys for my entire van with fobs. Love your channel! Thank you!

[alkhashtee]

1:15 do you have a video dealing with ignition cylinder?

[thebestSixZero]

I found a locksmith who was able to rekey the tumbler I brought him for a song.

[garymishler]

Where did you order the keys from, the Dodge dealer ? I checked on a price for a new key fob for my van and they wanted $600 dollars for a new one. There is a video out there showing how to install an after market fob to the center consul door lock for under $50. How much were the new key cylinders?

[banaanipuu]

i bought a 1997 vito and this is the only instuction on the web i have found about these handles. i am still fucked because i dont have the key so i dont know how to take the locks out

[jennifertran]

Are you in Tampa Bay Area? We have a few questions and would like your input.

[grahamhiggins]

Do you think the sprinter van needs added door locks to prevent theft?