2012 Honda CRV Rear Brakes (Pads and Rotors) | 2013 2014 2015 2016

In this video we show how to install new brake pads and rotors on your 2012-2016 Honda CRV (Gen 4) This is a rear brake job but the process is nearly the same on the front and on the other years.

(We didnt paint them buy we should have)

Brake pads and rotors are wear and tear parts and will wear out over time. Its usually cheaper and safer to replace both the rotors and the pads at the same time. My grandmothers rear brakes were rubbing and pitted, sounded like a freight train.

This process should be similar on the following vehicles:
2012 Honda CR-V
2013 Honda CR-V
2014 Honda CR-V
2015 Honda CR-V
2016 Honda CR-V

The links in this description are amazon affiliate links, at no cost to you a small percentage of the sale will help support the channel if you buy through these links. These funds help to do more reviews, tutorials, and compatibility tests. Thank you =)

Do at your own risk or ask a friend for help
While thecollegepicker strives to make the information provided in this video as accurate as possible, he makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. Thecollegepicker is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Tags

2012 Honda CRV Rear Brakes,2013 honda crv rear brake pads and rotors,2013 honda crv rear brake pad replacement,2012 crv rear brake replacement,2012 crv rear brakes,2012 honda cr v rear brake rotor replacement,2012 honda crv rear brake pad replacement,2012 honda crv rear rotor removal,honda cr v brakes and rotors,2013 crv rear brakes,2016 crv rear brakes,2015 crv rear brakes,2014 crv rear brakes,2012 crv bake rotor replacement,2012 crv brake pad replacement

[JoshyCC]

That plug is how you access a great to adjust the parking brakes with a flathead screwdriver. It has to be done with the brake disc/drum on, because you adjust the gear up until the drum is locked, then back the gear down a certain number of "clicks" according to your model and year (my 2011 was 8).

[Captainsaucebuckle]

I highly recommend cleaning and lubricating those caliper guide pins at least one per year on all of your vehicles. I used to have that same problem every time I changed my brakes. They also were causing my brakes to wear out prematurely. I never have that issue anymore, well worth the time in my opinion 👍

[vlan]

I've seen other videos and your is the best by far. Thanks! Subscribed and liked

[vegasrichsave]

Very helpful to know and glad safety is first! 📸Save money and save life

[ArmaSti]

Nice video...some of the things that you can also do while your wheel is out is to drain some of the old brake fluid as ur pressing in the piston on the caliper which will get rid off any air bubbles in the line. Also I lube the pads on the edges where they make contact with sliding inserts to allow for better travel and reduce sizing. Keep the videos coming.. cheers.

[rgraz]

I use a hammer like this all the time on the wrench to break free bolts and fasteners. I see no harm in doing it except for possibly marring the tools. That's how air impact tools work, correct?

[rattyguitars]

Almost the same as the front rotors except these have emergency brakes in the back. For the life of me, I cannot fully seat either the new rotor or even the old rotor back onto where it’s flush metal the metal so I can put the screws in. Do you have any ideas?

[cwvnxwi]

That's a combination wrench. Not crescent.

[rattyguitars]

It is a JIS Philips head and from what I have learned, it is best used on those type of screws. They do have an impact version.

[kristenmarie]

Impressive, and Cool! You sure are knowledgeable for not being a mechanic. 👍😊 ❤ Are you self-taught? Or, maybe taught by family growing up?

[speed]

What is a crescent wrench?
A crescent wrench, also called an adjustable wrench, comes in a range of sizes, from 4 to 24 inches (10 to 61 centimeters). A crescent wrench has one fixed jaw, while the second jaw can move left or right. The adjustability of the crescent wrench allows it to be used on many different sizes of bolts.

What does a hand impact driver do?
What Is an Impact Driver? A hand, or manual, impact driver is a tool that can be used to remove any screw, but is incredibly helpful when trying to loosen stuck, tight, and even rusted screws and nuts.

Where is the high temp brake grease for the pads?

The rubber plug that we all were watching you forget that you don't know what it's for is actually the hole to adjust the drum parking brakes, Duh.

[tuckerchronister]

You forgot to put that little plug back in 😂

[npqdsni]

What kind of rotor specs and brake pads did you put on?

[rmariu]

4th generation means there were 3 versions before this one

[unclebob]

Do NOT put any grease or lube on the end of the bolt with the dust boots; it will prevent the pads from moving equally - one will wear more than the other.
Whenever you spray a can upside down, only the gas comes out and not what is in the can... that is how to clean a tip on a rattle-can of paint....
Bro, get a set of metric / english sockets....