2011-2016 Honda CRV AWD Rear brake pads and rotor replacement

Hello Everyone! If you're about to or thinking about replacing the rear brake pads or rotors on your Honda Crv then this video is for you.

[grandexperiencesphotos]

Real nice video. Short no drawn-out stuff yet some fun dialogue at the same time

[private]

thank you for this quick tutorial, cant wait to fix my rotor after 5/6 year of purchase

[Joshua-dxzn]

I would have used some anti-seize lubricant on the retainer clips (which you didn't replace I guess) where they meet the pads. Would have also cleaned where the rotor sits and added some lube there too. With that much rust, you're probably going to have some issues with everything sitting well.

[Broncofivepointslow]

Great video, the tool sizes save time and I appreciate that.

[SocialObserver]

Great video, is there any procedure with regard to adjusting the handbrake when replacing the rear rotors?

[OneRedBeast]

Did you lubricate the slider pins before re-install? Thanks....

[HVYBASS]

If you take the bracket off first it's a lot easier because of that brake pad pin that holds it to the caliper I also drill out that screw on the rotor if it doesn't come right out that could be a real headache

[mattkilbourne]

Nice and to the point. Thanks! Q: Did you replace the pad retaining hardware/clips? Couldnt tell.

[crazycrawford]

Maybe I wouldn't hate working on cars if I didn't live on the east coast

[johnnyrotten]

Great video. The pad and rotor kids include grease. I didn’t notice you use any? Do the pads need grease on the ends or just the sliders bolts.

[andyhuang]

Great job but why didn’t you clean the piston and rotors?

[bozagacli]

How did you compress the piston? Straight down or "turn and down"?

[ExtremeRecluse]

If the rust is that bad. Chances are the interior of the calipers is just as bad. Just replace the calipers. $120 and you take away all of that headache. Get some good rustoleum spray paint to paint the calipers and brackets. Where did this guy get his powder coated rotors?

[gerrymcintosh]

Excellent video. I really like the stubby impact tool. Could you give us some details on this tool, if you don’t mind?

[danmorrison]

Do you torque the caliper bolts to a certain foot pound or just tighten by them as much as possible? Thanks!

[ishworirish]

I spent maybe an hour an half just inserting brake pad with three prongs on the caliper.

[danielcarney]

My rotor completely stuck. A simple love tap did nothing... about to get domestic violence charges with the amount of beating I've been trying with ZERO luck. Any ideas?

[daviddelattre]

this video is not for a 2016 hr-v awd ex-l .the caliper does not press back like in the video, it has a plastic motor unit on the caliper. this has to removed to depress caliper back and first adjust caliper on the back side where the plastic unit was

[mikef]

Is there a torque rating for the Bracket Bolts or Caliper Bolts?

[donnafinocchiaro]

no way this car was being driven on the road like this .