How to Replace Steering Rack & Pinion Bellow 2012-2017 Toyota Camry

Показать описание

Buy Now!

This video shows you how to install a new steering rack bellows boot on your 2012-2017 Toyota Camry. The steering rack bellow is a plastic or rubber cover used to protect the joint between the steering rack and the tie rods from dirt, debris, water, and other contaminants that could corrode or damage the tie rod joint.

This repair was done on a 2013 Toyota Camry SE 3.5L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2012 Toyota Camry
2013 Toyota Camry
2014 Toyota Camry
2015 Toyota Camry
2016 Toyota Camry
2017 Toyota Camry

Tools you will need:
• 19mm Socket
• Pliers
• Side Cutters
• Drill
• Anti-Seize Grease
• Cotter Pin
• Marker / Writing Utensil
• Rust Penetrant
• Wire Ties
• Sledge Hammer

Check out our playlist:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.