THE STRONGEST RESIN IVE EVER TRIED | SuperPP by 3DMaterials

3DMaterials sent me this resin to try out, and over the past while ive been testing it to give my honest review on it. They did send me this free of charge, but they had no input on the review, and anything said in this video is my opinion only.

[mitsubishimakes]

I am a simple guy. I read "SuperPP", I laugh

[geocraftsman]

Seeing the model file name "PLEASE WORK" Is beyond relatable

[syllync.e]

I've been searching for a strong resin. Now I have the information needed. Thanks so much!

[capncook]

While I am late to this video, I was wondering what the exposure times you used on the SL1S for this resin were. Also, curious about the washing and curing times so as to avoid over-exposure to IPA and UV. Thanks

[jeremiahembs]

Try increasing the light off delay to reduce warping. Use that light off delay to try to add three seconds of print time to each layer overall and see if that helps.

[juliancastellon]

Thanks for the video! How long are you washing your prints for?

[Bahtulj]

Hello, just a question, for how long did you cure the prints? Thank you.

[jimmyjames]

this video doesn't really prove anything, no real tests here, so you can't break a miniature, yeah cause tats the industry standard for doing strength tests, not every prints minis, it not like they need to be strong, you have given no information and its very easy to scam people with the video, you could put some flexible resin in the mix, and you only really comparing it to elegoo resin which is known for being brittle

[philflip]

Might I suggest that if you want to test UTS you could suspend a barrel from your testpiece and then begin to fill it with a hosepipe. 1 Litre of water weighs 1kg of course.

[samsara]

Is normal that it looks glass transparent after printing and the it looks more opaque a like little green color??

[nofineno]

Thats really great. What about light weight clear resin, so the things can be float. Do you have an information?

[protostar]

I know I'm late to the game on this, but how does it hold up for balljoints? Does it dust really bad or does it work better than M58 ABS-Like resin that has basically no dusting?
(Dusting being when the ball grinds against the inside of the joint the resin grinds away instead of glides over itself resulting in quickly deteriorating joints)

[toad]

So tech Blu or superpp that the question, building parts for a 6dof Simulator

[blueckaym]

I'm looking for tough resin to print a 14 cm diameter centrifuge drum spinning at ~12, 000 RPM, which should generate ~10, 000 g.
Tinting it is easy, but warping worries me, perfect balance at very high RPM is critical.
But perhaps I experiment mixing it with other resins (if I can find it near me - ie in EU)
Thanks for the video!

[andyb]

Buy yourself a tripod for filming, instead of one handed film making. It makes it better to watch.

[copper_knight]

I use a mix of standard and siriya Tenacious at the moment. After printing I use hot water to bend to reshape my prints and then cold water to solidify them in their new shape. From what I read I will be able to do the same with this resin. After a few hours/days the print will always go back to its original flat shape. I use CA glue to hold it back but the force pulling it back to its original shape is strong. Do you think I'll have better results with this resin ? I have tried to shape and then UV cure but it doesn't change much...

[samjohnson]

I wonder if adjusting the wavelength of light might have an effect at reducing (or amplifying) light penetration for the curved gradient facing the LCD problem, higher intensity light tends to penetrate more things, and lower intensity light tends to penetrate fewer things (the difference between gamma or xrays and radio-microwaves)

[jonoag]

Hey mate...
Brand new to the Resin printing world. I've just gotten myself a Resin printer and i was wondering if you had to change any settings to print with this resin?

[chadanooga]

I have the Amazon shipping app and I cannot seem to find this resin… can you help me?

[laserclowns]

Looks like you got elephant's foot. Have you tried Saraya's resins? Wondering how this resin compares to tough or tenacious