How To Make Cabinet Doors - Super Simple - #diy #woodworking #cabinet

Making Cabinet doors can be super easy and very cheap! I'll be showing you step by step how to I built this Shaker Cabinet door with just plywood and common 1x4's.
I try to respond to all comments so feel free to reach out :)
Have a great one!

Disclosure: Links contain affiliates.
As an Amazon Associate I earn from qualifying purchases. When you buy through one of my links I will receive a commission. This is at no cost to you.

Thank you for Supporting me!

*Products I Like*

Dewalt Table Saw

6” Clamps

24” Clamps

Titebond 2 Glue

Titebond 3 Glue

Milwaukee Hammer Drill

Rigid Planer 13”

Milwaukee Cordless Router

Milwaukee 18 Gauge Brad Nailer

*Equipment for Filming*

RODE Wireless Go 2

Canon EOS M50 Mark 2

Raleno Softbox Lighting

[DrewLarsenDesigns]

Want to see how I built a workbench with only two tools!?

Check it out —-> HOW TO BUILD A SIMPLE WORKBENCH

[davidboston]

Awesome video, you scaring me having long sleeve near that blade

[flfbsphatboyblue]

It’s a lot easier to run your grooves all at once on long boards before cutting to proper length. Thus avoiding constant adjustments to the blade and fence. Once that is done, you can move on to the tongues.

[Tamytutu]

You did a awesome job!! Thank you for this video!!

[derpherpp]

i like your techniques without needing dato blades or homemade cross cut sledge...while other channels have flex and 10k worth of tools

[ryandeschanel]

8:45 and the tenon will eventually grow naturally into the mortise?

[davidriblet]

so the last cross piece didn't get the tab cut to slide into the uprights???

[andrewd]

Been woodworking for almost 50 yrs and Wow and ouch.... is all I can say

[sajidrafique]

what wood is your 1X4 ? Poplar is expensive . !!

[davidcurtis]

Panel looks a bit tight and you don't fit the rails into the panel. You fit the panel into the rails...if you can't slide the plywood in the grove, your grove is to tight. Make rails and styles to fit the door opening and then cut the insert panel to fit. Groove on rails and styles can be the same depth and width. Why complicate things like you did??? Cut the styles to length right the first time. Again, the plywood panel is to tight... Cut both styles at the same time. I know that plywood doesn't expand and contract like solid wood will but you should never use that much glue in the slot of the second style. And before you send me a reaction to this, I have been doing this same thing for over 60 years and have had no problems making a living and have had no call backs for doors that came apart or didn't fit after several years.

[franmcnamara]

Making a mountain put of a molehill ...for God's sake cut four pieces and put together ...you made a simple job look so silly .