Manual Diagnostic Check. No OBD sensor needed.

preview_player
Показать описание
1993 Toyota corolla. I show how to manually check a cars diagnostic system without a OBD meter.
Рекомендации по теме
Комментарии
Автор

Question i have a 93 toyota corolla with a 4afe engine i set the pins on the diagnostic port and it os flashing rapidly non stop do you know what the error codes are because I don’t have idea

christoscharalambous
Автор

Should you short them out while car if off then turn on? Then turn it off before removing the short wire?

gam
Автор

Where can I get the diagnosis codes lost to know what each number flashed means

timjnbaptiste
Автор

Hey Mark.I hav a 1998 rav4, quite old, I wanted to change the HT cables, took them off put new ones, car won't start.replaced the old ones car won't start..it just cranks.tries to pick up but dies down..hav checked spark n fuel, they ar all OK n so is the firing order... Where am I missing it?

luckymutibo
Автор

dude, i have the same 31 code on a rav4 and can't find what it is. Ive changed the map, my car jerks as before while accelerating. Changed the air hose next to it, the splitter (gas filter) and cant find a solution...

yanisrenaud
Автор

In my case it is just blingking what mightbe the problem bro. My car has no crank.

ramonmedelfberiso
Автор

HELLO, I CONNECT TE1 AND E1, BUT THE ENGINE LIGHT FLASHES ON AND OFF CONTENTIOUSLY
THERE IS NO 21 21 CODE
MY CAR WORKS FINE BUT WHEN I ACCELERATE THE SERVICE LAMB LIGHTS FOR A SHORT TIME
THANKS, AND SORRY FOR MY BAD LANGUAGE

iraqgisteam
Автор

What about when the check engine light continuously flashes without stopping?

UngodlyXiX
Автор

esse procedimento funciona no Corolla 1997 ? obrigado

fabiopeccini
Автор

Where would the portal be on a 89 commodore Vn. It's computerized just pre diagnosis era

jojozepofthejungle
Автор

My contact in obd its cercle objectif in m'y toyota camry 1997 ' how diagnostic that ?

babakpezeshknia
Автор

Hey Mark, do you know how many PINs are on the diagnostics port?

cesaroropeza
Автор

How many pin in old obd port connector in toyota corrola gli

kylalacibal
Автор

Hi,

Is There any tools that can connect this port?
what is name of this port?

buddhikaamilarahtnayaka
Автор

What if my check engine light doesn't blink at all? @

zacharybarlow-uzpv
Автор

Mine starts and stops wen I bridge t and e t
The moss is none stop blinking

kholwanindlovu
Автор

What if the car won't start, will it still show 'codes' ? I put in anew distributer and it fired right up. 10 minutes it dyed, restart a couple times then not. Next day, started - dyed, , two times. Where do I find list of 'Codes' ?

stephengrosshans
Автор

Hey i swaped my car with same engine but it doesnt have a check engine light since the engine was swaped from 1.3 carburater to 4afe so how can i put a check engine light so i can se the codes plz help 😊

khanktk
Автор

2 Questions, 1: if I have a wire jumping the diagnostic pins but no o/d light blinking did I do something wrong?, 2: when I jump the pins CEL is the only thing that's blinking, not in Morse code fashion, just constantly blinking. any help would be great

RandoKing
Автор

What is the diagnosis box for? I have 93 toy corolla and don't know what it for. I opened box up and it has a white goo all over the open holes.

beingsaveddaily