How to set air compressor shut off valve

In this video i show how to easily adjust a air compressor shut off valve, so that it stops charging at the desired pressure ;p

[roadrunner]

I had a problem with my Campbell Hausfeld twin stack. It would build pressure to 115 PSI and keep running without shutting down until I manually flipped the switch. It wouldn't build up to 135 psi. I replaced the check valve and loader valve to no avail. I was happy with 115 psi but it just would not shut off. Someone trying to sell me a new pressure switch for $75.00 until I decided to just cope with it and leave it at that. Until I saw your video. That SOB wanting to sell me that new switch didn't tell me I could dial down the pressure from my existing switch to make it shut off at 110 or 100 psi. Your tip solved my problem, Thank You for posting this.

[mikeswift]

Eh mate thank you very much for the video it is the only one I could find on YouTube that solves the auto shut off. Turning the power off is the magic key that no one mentions.
Anyway its all working now thanks to you mate, many thanks from Scotland.

[prabalmitra]

Sir, Thank you for showing us how to adjust the high pressure cut out, we would appreciate if you also showed us how to adjust the low-pressure cut in.

[luke]

I phones the main dealers and they told me I needed a new switch. After installing the new switch It still was not turn off So i followed your instructions in the video and it worked.Thank you very much you've been a great help 👍

[MotiveJ]

thanks i spent 2 hours fixing all the leaks from the couplings and regulator and this was the last problem i couldn't figure until i saw this video thanks u saved me lost of time.

[kiwi]

Thanks man, this worked for me. Exact same problem, this valve was leaking so just had to wiggle the bolt and add some CRC and all good!

[RichardDLauer]

Thanks! It was fast and simple to do. The unplugging at the desired pressure and adjusting did the trick.

[sidneynangai]

Thank you for this. Well explained and to the point. Thanks a lot

[ScottishLad.]

Got a new compressor and it wouldn't shut off. Thanks to you it now does. I set it just under max operating pressure. Thank you very much.

[simonwyatt]

Thanks mate, I thought I'd have to have my compressor repaired but I followed your advice and it works perfectly.
Thankyou for taking the time to help others.

[AuProspecting-Scotland]

ours wont shut off, gonna try this at the weeknd, hope it works, will update after test, thank you mate.

[mikecatherine]

Thanks for sharing this, a really simple way to set it.

[dpmcox]

Brilliant. I am in Australia, it is so good to see I had an almost exactly the same unit. Problem fixed in about 10 minutes. Thank you!

[jaimz]

That part you pulled the ring pull on to release air, what pressure would that release at if you kept pumping air in?

[MrOner]

Very helpful...straight to the point...very good job sir...clear

[JCcanU]

20 years ago I got a new 150 psi compressor, I turned it down to 125 psi shut off . it has never run out of air, reset the turn on to 80 psi from 100, most tools run on 30 to 90 psi, when you buy a new compressor turn down not one air tool needs max psi of 150 or 200 psii and it will last longer . Less run time . I worked in a few shops with 100 gallon tanks and they put out 120 psi for air tools 10 guys working on the line with impact drivers .

[doghouse]

this video helped me out so much thank you very helpful

[jayr]

Thanks For The Info 👍
It Solved Problem.
Keep Up The Work.

[CSSIandAssociate]

Thank you we were having this problem. Will check tomorrow.

[pauledwards]

thanks mate great vid going to reset mine now as it wasnt when I bought it