How to Reprogram your New Throttle Body 02-06 Nissan Altima

preview_player
Показать описание
Buy Now!

In this video, 1A Auto shows you how to reprogram your throttle body. This video is applicable to the 02, 03, 04, 05, 06 Nissan Altima

🔧 List of tools used:
• No Tools Needed

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Рекомендации по теме
Комментарии
Автор

√ *Watch the Video*
√ *Do it Yourself*
√ *Save Money*

AAuto
Автор

Helpful solution to my situation 2005 ultima 2.5, after numerous tries of the car not taking the reset I did 2 things, first I reset the check engine light to get it off : switch ignition on 3 sec, 5 times press accelerator release in 5 sec, wait 7 sec, hold accelerator down 10 sec. Second I disconnected both the negative battery cable and the throttle body harness then reconnected. Afterwards completed all instructions in this video using stopwatch letting it run continuously through steps, being as on time in the seconds as possible and now mine is fixed! Thank you 1A Auto for your super helpful turorials, you are greatly appreciated!

adorableone
Автор

Thank you guys at a1 auto. This video helped me a lot. I didn’t know you had to reprogram anything until now. It worked great with my 2002 Nissan Altima with a manual transmission. But I also followed the advice of another person to make the idle go back to normal. When getting rid of the code then you have to unplug the throttle body and the battery- , wait a minute or so plug it all back then put the ignition on On wait 3 seconds, then pump the gas 5 times in 5 seconds then let go of the gas pedal Wait 7 seconds then hold it down for another 10. The check engine will blink then when it stops blinking and stays on let go of the pedal wait 3 seconds and turn the vehicle on. The cars idle should go back to normal. Like 600 - 800 rpms. Thanks again.

avfonsi
Автор

For Nissan Tiida 2007: After CEL becomes solid again release the pedal, start the engine within 3secs and let it idle. If it's still high-rev/pulsating idle, with foot on the brake, shift into Drive. Idle will now go down under 1000rpm. Shift to Park again, and the car will find its regular idle speed (near 650-700 rpm). BTW, thanks for the video.

marydensio
Автор

I had the worst luck and almost gave up and took it the shop. Make sure your codes are cleared. Drive around for a little, stop the car, take keys out ignition for a little. Keep your key in the ignition and do everything in a row and use a stop watch. On the 2nd step, turn on and off quickly instead of counting. Did it like 20 times and having a breathalyzer made it even more difficult 😅

johnnygxiii
Автор

Would it be the same procedures for a manual trans too?

belio
Автор

On the idle air....after pressing 5 times the engine light will not blink after 7 or so seconds...anyone had this problem?

jackala
Автор

Will this work for a 2011 nissian altima with push button start

jayschnabel
Автор

Thank you for your video..
Is that mothed suitable for 2012 model nissan altima...??

hayderali
Автор

Every video I've seen so far is Automatic. Is it the same process for a 2004 Nissan Xterra base model, 2.4L, 5speed manual.

xyprophis
Автор

I hope you still look at this. Is it the same procedure for an 02 frontier manual trans?

williamrogacki
Автор

Thank you! I'm assuming it's the same for 2005 maxima since there is no video for it.

alecsithong
Автор

I have a 2017 Nissan Altima. Is this the same procedure I would have to perform on my 2017 Altima?

isaacboy
Автор

Do you have the learning procedure for a Nissan Altima 3.5 se 2007 ?
Or a link to where I can find it

SaintIvo
Автор

Does Nissan Rogue 2014 awd sl also has electric body throttle which requires relearning after cleaning?

TSA
Автор

I can find how to do it on my 2015 pathfinder wih a push star button. Would it be the same?

mycuriositypodcast
Автор

Is this applicable to old Nissan's? 87 Nissan D21

jaimeramirez
Автор

How do u get the Allen wrench to stsy inside

_papa._popa._
Автор

Will this work with a 2001 Pathfinder ?

salvadoraleman
Автор

I have a 2008 nissan altima with push button it still the process to relearn the p2135 code

Chilangoful