How to lower your car without Lowering springs!!

This video will show you possible ways to lower your vehicle ride height without the use of traditional lowering springs. This keeps the ride comfort the same as original.

@BalladeSports

[birdy]

I’m gonna do this on my Bugatti Chiron

[warrenlucier]

Nice job and I did this to a base cab Tacoma. I had to make my own lowering kit for the front and a lowering block was available for the 3rd member (1"). Project Runt build or X Runner Jr. .

[khancross]

This setup is more expensive and more difficuilt to install then lowering springs

[Krown_Point_Homes]

This is one of the better videos i have seen on this. Great job on creating this "how to video guys". You now have a new subscriber!!! 🙂

[Klutch_V]

I want to do this to my GTI! Going too low on colorado roads is a death sentance. Thanks for the video

[sukrytuah]

where can i find those thing.. and is there for any other model

[Steinersgarage]

not possible on my setup as my spring acts on the upper controll arm. but this gave me high spirits. im currently building a track car and so an extreme weight reduction was done. so even with my lowering springs it seats higher than with stock springs. becauce therye way stiffer. ow i know what needs to be done to lower it! thanks!

[benjamingoodsell]

How much would it cost to do something like this? Parts and labor

[thethingsyouwillfind]

This would be cool for my 2022 ford Lightning

[johnharland]

WRONG! Most all coil over shocks are designed for the spring rate and application. The harder or softer ride is determined by the application i.e. track or street. News flash, coil overs and lower springs are two completely different things, you cannot relate one with the other when taking about lowering ability or ride quality. You just changed the rebound and dampening the shock was meant for relative to the tire size. No real test drive or mention of ride quality is a dead give a way.

[yvansrosier]

I wanna do this to my 05 Chrysler Crossfire convertible

[ldqqpsk]

Would you share where you purchased those lowering ball joints? I really want to do this on my 2013 Honda Accord Sport sedan. Thank you in advance, Rick

[michaelbryant]

This method is awesome if the aftermarket promoted and supplied a wide array of these longer balljoints.

[Marlonhernandez]

What is this process called? If I want to this for my car. What should I tell the mechanic?

[dwightleichliter]

Let me first say, "I'm sorry" for the brutal honesty that is about to come your way. I had the same reaction as most of the women you know when I thought to myself, " I wasted my time for an inch?!" Once again, sorry.

[ericwatler]

Please tell me y’all have these for a dodge charger sxt v6 2012???? I have eibach pro kit with the eibach struts and the ride Quality is really really bad over bumps and imperfections on the road. And if y’all do how much for front and back? I’m looking for a 1.3 front drop and a 1.4 back drop. I kept my old struts and springs just incase

[mazdaman]

So you fit a snap ring to stop the ball joint from backing out, yet the castle nut that holds the ball joint to the lower control arm completely passes the split hole so that safety of a pin is completely omitted. What does your insurance provider say about altering the suspension geometry in this way ? Do you even tell them ? Manufacturers spend a lot of time and money building safety and more importantly, predictability into their suspension systems. What are your caster, camber and toe settings ? How much does this modification alter the KPI and slip angles ?

[Tommyturbo]

It turned out nice. Good height. I really want to do do that to my 07 mazda 3. The previous owner took off the 15in steel wheels and and added 17's, but but the front sits so high. I want to eventually put 18" rims on the car, so I'd probably wait till those rims go on and the worry about the height

[Unplugged]

I have an 08 Lexus Is350. I put on 19” wheels and it still rides high. I really want that lowered aggressive look.

I like the comfort of the ride so really don’t want lowering springs or coils.

May look into this. Hoping they have this for Lexus IS

[gruvmin]

I am trying to help an 86 year old neighbor with her RX350. It is WAY to high for her, and she can't afford another car. Where/how would I get lowering ball joints for her? Can I get to 2-3" lowering? Regards, Bo