Setting Transmission Fluid Level 2010 Toyota Camry

How to do this without a scan tool.

U760E/F
6 speed automatic transaxle (I4) 6 speed version light duty version of the U660E/F

Application:

2009–2018 Toyota Camry (2.5l I4/FWD)
2008-2016 Toyota Venza (2.7l I4/FWD)
2010-2012 Toyota Sienna (2.7l I4/FWD)
2010-2019 Toyota Highlander (2.7l I4/FWD)
2008-2018 Toyota RAV4 (2.4l I4/FWD)
2012-2018 Toyota RAV4 (2.2l I4/FWD)
2011-2016 Scion tC (2.5l I4/FWD)

[CrispinAuto]

Great informative video. Always smart to watch a good video before doing something you've never done. That being said I think we can all agree that this is beyond ridiculous and extremely over engineered. I say this far too often but there was never anything wrong with a plain old dipstick. Lots of room for error here. Anyways, now ill go fill up this transmission.

[oldallthis]

Great video! Question: If the vehicle is cold, and I use a vacuum (like a MityVac or brake bleeder) to pull out exactly 2 qts. from the fill port, why can’t I just put exactly 2 qts. back in?

[pcihector]

I think there is a service bulleting to check the fluid level at normal operating temperature that involves using a kind of 'fluid level tool' and a vacuum pump too.

[udigloberman]

hello great video.... may I ask if the short between pins 4 and 13 of DLC holds for a 2008 Camry 3.5 liter as well?

[yatzirimoralescruz]

Cuantos litros de tiene que llevar en la trasmisión ?

[mostlymoparih]

Wait a minute.
Wait a minute.
Where's the dipstick?
There is no dipstick.
What? Okay where's the fill tube?
There is no fill tube.
I just watched a video where the guy is ranting he says We need a special dipstick because someone doesn't give you one.
Finicky aye?
So when you check the fluid level on this car you close one eye, lick your finger, see which way the wind is blowing and make sure you follow the checklist.
Looks to me like buying a special dipstick is a bit easier to do than this procedure.
Good video. Happy Motoring.

[lexxluther]

How much would it cost at a dealer to get this done?

[guillermo]

Thought I’d ask you for help. 2009 Toyota Camry v6 went into limp mode with cel on throwing code p0015 and p0746. P0015 was fixed but when you put it into a gear it doesn’t move. What causes p0746

[NYPHOTOGRAPHER]

How often should it be checked or changed

[odinakaodinnuta]

Hi, with the way the oil sump is constructed, are we actually able to get all of the old fluid out? Or we have some left over fluid.

[bryanlexus]

I got a 2010 Camry, came with a bunch of codes p0741/0746/0766/2714/2757/2808, but vehicle has 200k and I’m assuming no service has been done to the transmission, would it be wise for me drain and replaced filter to inspect shaving in the pan? Or drain and fill with the best hopes first. If not I’ll just replace the whole thing lol

[knameern]

Hi. After completely draining the trans oil and replacing the filter, how much of oil should you add for Toyota Camry 2008? I put in 5.7L and the car started missing gears (4th and above mainly) so I took out 500ml. It's still slipping gears. How much should I have in there?

[frankmontez]

This toyota tech by the name of car care nut has these videos in which he tells of this other way to check fluid level by using laser temp gun . Running car to specific temperature . But though he gives the general temperature he doesn't give specific temperature . Can this be a good way to go by only using temp gun ? And he doesn't replace filter either like you ..Although he and others do

[TFD]

This does not look like something you can do in a driveway errr