Fans are not lighting up kn my NZXT X53

[pefalt_io]

This is happening to me too, but i just realized theres a rgb version and non rgb version of the x53 aio

[alvinwong]

Get the controller, so that you can control individual led via nzxt cam.

[Mr-Riker]

Bro !! Put your radiator on the top of the

[lukasseiler]

Guys u need the Nzxt Fan Controller to use the rgb of the fans. It cost about 25$

[lowebudget]

Mine does the exact same thing looking to find a fix

[GG-ysuh]

Mine was doing the same thing and I found out what was wrong

[adamhearts]

SOLUTION :

The box comes with 2 cables that are labeled: IN AND OUT

one longer one and one short one.

The short one daisy chains the 2x fans in the radiator together. On the spot where the fans have IN AND OUT plug mounts.

Install the fans so they are positioned next to each other, the short cable will only reach if they are next to each other.

Now the long IN AND OUT cable, , plugs into the wire running out of the Pump itself, , and it plugs into the radiator fan case that is labeled OUT.

if you don't have RGB, it's probably going to be empty and tucked out of the way.

Mine had nzxt printed on the end of it, you need to plug the IN labeled end of the wire into it.

SHORT - in out - cable goes on the 2x fans.

LONG - in out - cable plus into the OUT label ON THE RADIATOR FAN, , whichever is more convenient for wiring, BOTH FANS HAVE IN AND OUT sections.

LONG in and out wire then plugs into the wire coming OUT OF THE PUMP, it's a 4 pin clip connection.

then run the radiator fan wires normally to the mobo.

❤🎉