DJI Mini 3 Pro Broken Gimbal Repair [ Change Only The Broken Pieces ]

DJI Mini 3 Pro is easily Brake the Gimbal When Crashing. You no need to change the whole gimbal because Mini 3 and mini 3 pro is easy to repair the gimbal. Change what you think is broken.

Cheap Aliexpress Link:

Feel Free to Contact Us for more Information about Remotely Fix 40011 and 40021 for all Mini and Air Models.
Whatsapp : [phone]

[thomasblade]

I am seriously in awe...I don't leave YT comments very often but had to make an exception. I crashed and had the EXACT same damage. I thought I was gonna be toast. I found this video and was able to follow along and take my drone apart and order the replacement parts. Thank you SO MUCH. if anyone else is reading this and has the same broken arm HAVE. NO. FEAR. IT IS FIXABLE!!!

I found the parts on Amazon..little priceier than Ali but comes in two days. I used an iFixit pro toolkit with the metal spudger.

one not - BE CAREFUL when removing the top shell. the GPS unit is right inside and has a fragile ribbon cable.

THANKS AGAIN!

[helrysbalko]

Hello friend, fantastic your tips, following them there is no mistake. I did the procedure as explained in your videos, it worked perfectly, I am forever grateful to you and your content. As for users who are in doubt about the tips, I recommend everyone to do it in the explained way so that there will be no errors. Once again, thank you very much and you already have a new subscriber on the channel attentive to your tips.

[captainsustain]

Read before disassembling! Nobody mentioned that you need to buy new rubber bands to reassemble the gimbal. My rubber bands have trimmed tails that allow them to be installed during gimbal assembly. As a result, I was waiting for the delivery of the broken part, replaced it, and now to put it back together, I need to order rubber bands again, on which the gimbal attaches to the body, and wait for delivery again. Make sure these rubber bands have not been trimmed, or order them right away, or disassemble without removing the rubber bands from the body.

[Donaldman]

Thank you sir. This was exactly what I was looking for & saves me $$$! Earned a sub

[alonzo]

Thank you, i actually fixed it with sharp tweezers, not dental floss...but your video gave me the push and idea i needed

[guillaume]

Wow, thanks bro! Exactly what I was looking for.

Hats down 🙏

[casdessers]

Hello. My left gimbal arm is broken (the one without the cable attached to it). How do you recommend to fix it? Take it out completely?

[Кирилл]

После выполненной работы нужна ли калибровка подвеса ?

[timothyfrederickchurch]

Do you think my camera gimbal is ok if I forgot to pull the black padding in the back of the camera when it was new while turning it on? Are the motors ok?

[DashFlicks]

there are white dots on the motors where are these suppose to point? front?

[JamieThomas-jt]

Good day Do you know which part I need to replace if I have a compass and IMU error?

[jankowalski-fqib]

Hello. Do You know where I can buy gimbal shock absorber for DJI Mini 4 PRO?

[dmctec]

Hello. I have a crack in my arm, and the left motor (where the cable does not pass) is stuck, 1D010002 error. It does not rotate 360 ​​degrees, only 50, I think something is blocking it. Additionally, one of the 3 posts that the motor has for the elastic plastic shock absorber broke. I have seen the two videos of this man skilled as a surgeon many times Change motor left and this video, and I do not dare to change the motor, arm and the two shock absorbers for fear that it will not fit well or another error will appear. I currently have 1D010002 "stuck". Where I live there are no DJI technicians and shipping the Mini 3 Pro drone would be very expensive. For now, I bought the Mini 3 and linked it to the DJI CR (screen). Your videos are very good. Thanks! 😅

[ramadhanputrajaya]

Hello there, is that DJI Mini 3 Pro's Gimbal (Camera area) can swipe to DJI Mini 4 Pro?

[SupplyVibes]

What made you where gloves ? Should I ?

[thegreatones]

If my gimbal Bracket is broken but everything else seems to be fine, when I reinstall the new bracket like you did in this video should everything work fine?

[maroskara]

Hi Thx for sharing video of fixing gimablal. Wher do I get spare parts? Any advise? Thx

[Togethertales]

I have mini 3 pro and the gimbal it make noise. How could i fix that? Appreciate your help.

[eutonoar]

Ola família EU TO NO AR passando para deixar aquele like do fortalecimento e parabenizar pelo ótimo trabalho

[Fix_andri]

Thanks for tutorial
Next pleash repair dji mini 3 pro board off