How to Strip any Wire quickly and Without problems. TOP 15 LIFE HACKS.

How to strip any wire quickly and without problems. 15 life hacks.

This Device will bring you a lot of Money. How to get Copper out of Wires in 5 minutes.

You will need it. The easiest way to strip Wire insulation.

This video will make your Life easier. Copper from thin Wires, quickly and easily in just 8 Minutes | 3 Mega ideas.

With this Knife, you can remove the insulation from Copper Wires in just a couple of seconds.

Top 3 Best DIY Wire Stripping Knives.
How to Quickly Strip Copper Wires without Tools.

Best Knife for stripping wires | Make it in just 5 minutes.

How to strip insulation from any copper wire in 5 minutes. The best method.

#copper #stripper #cable

Best Tool to Clean Copper Wires from Insulation.

In this video I will show you how to make devices for stripping copper wires and cables, this machine will help you easily remove insulation from any copper wire,
You can make this machine with your own hands, easily and simply from almost improvised means. This is the simplest cable stripper and you can easily clean large quantities of copper cables in a short time. This is the simplest machine for cleaning copper wires, even a child can make it.

__________________________________

How to make a copper wire stripper, how to make a machine, a cable stripping machine, a do-it-yourself machine, how to strip insulation from a cable, how to strip any copper wire, a cable stripper, how to easily split a cable, a stripping tool, manual cable stripping machine, copper, how to clean copper, how to burn copper wires, copper wires, copper cable,Copper, how to burn copper wires, copper wires, copper cable, how to strip insulation from a cable, how much you can Earn, non-ferrous scrap metal, handing over scrap metal, searching for Scrap metal, how much you can earn by handing over copper, how to strip a cable, how easy it is to cut a cable, copper, a lot copper, how much is a kilogram of copper, where to find copper, medi,

[eternalblackfire]

Thank you for the tutorial for those of us who work as copper cable finders in empty houses

[jaydeavor]

#12 at time 15:08 is about the easiest one I seen to make and it actually worked

[josueolivos]

i remember doing this with my dad when i was really young. he would hold it down with his foot and use a blade to cut off bits...shit took forver if only this video existed back then!

[simonpeterdavies]

It's the nuts I've spent hours stripping cable by hand wow these hacks will really help me loads 👌 👏THKZ 👍👏

[chatramprashad]

The first one seems the easiest I gotta try that thanks!

[mariuszduszczak]

Every thinking ok, but I dont understand why You destroy new cabels?

[betatester]

53:34 Ахренеть! Не проще ли продать провод как изделие? Больше выгоды получить можно!

[dietarychef]

I thought number 6 was a failure. You could clearly see that it was not good at stripping wire

[argent]

Just got me an 80 PC. Rotatory Tool Kit at Harbor Freight tools for just $9.99 + Tax. The warning reads: "This product exposes you to hamfurl chemicals including led, whic is known to the State of California to cause Well?!, I have nothing to worry about: "I'm in Texas, not in California". King of Copper, Howdy?!... can you make a video of things I can do with a rotary tool kit?. Thanks.

[ChrissyLarson]

For Romex it's faster by hand but for small stranded wire this is awesome. For sure gonna save a bunch of little stabs by the stands. Cool video

[neodymowymario]

Wooow rewelacyjne pomysly 😊😊😊 Pozdrowionka ‼️‼️‼️

[happinesscompilation]

The crank one is the best. No copper was lost during the stripping. Also put a 12v motor to the crank and you can strip wires all day. No dull blades to be replaced which means lower expense.

[amjmmint]

Something I've built has some elements from a few of these. I really like the simplicity of the basic sharpened groove straight tool, maybe offset at whatever angle is most comfortable for the user, but overall a safe method if using both hands, the flexibility of the saw blade giving good tension feedback. Some of the designs with the spring and the full length of the blade are foolish, if you are doing something like this with your hands the last thing you would want is an exposed razor slicing your fingers, feeding those mechanisms will teach you quickly. The larger gage wires they are cutting in many segments are very easy to do with a basic knife, use a rubber band or 2 to bind the handle of a pair of pliers, open them to bite one end of wire, step on the pliers and rake a knife or even just a sharpened piece of metal along the length of the wire, it will destroy the coating enough to pull the wire out. You don't need a box or rig for those sizes. That being said, many of these designs have no adjustment dials or very few options for the amount of effort making them. Maybe clever, but the tools where you are fighting your own other arm are poor choices. You will tire very quickly if output is your goal. Being able to pull through a fixed point with both arms, maybe even your back like a rowing motion is a far superior use of energy. The old shaving blade was interesting, like most things the simplest approach is likely adequate. I don't know if those are replacement blades or need resharpening, I haven't seen one in ages but essentially the same method of dragging a knife along the coating (pull sideways, not toward your body).
I have a V-cut roller on a bearing with an adjustable blade from the top, blade has a guard through the knife edge to limit cutting point exposure and add stability, block fixed to the top panel with a threaded rod to the side panel for centering fine adjustment. As is my rig uses one hand to feed start and then hold the box and the other to pull the wire. It's a small 8"x8" I can work while I watch videos online. As it evolves I'll experiment with the RPM stable enough to pull wire off a small motor and maybe incorporate some of these guidance methods with the eye screws onto some flaps on hinges with a locking pin.

[uczuqnb]

Thnx bhai app na kaida karaya bhot bhot thnxx❤❤❤❤

[Volvoamazon]

@50:00 : Why do you want to strip such length new cables?

[matcha]

Never seen the cheese grater method before. Interesting concept.

[patrickrooney]

Some brilliant ideas there. Could you please tell me were you are getting your copper from. Lol.

[sucker]

SAFETY PLEASE on build 6 you drilled a hole through a utility knife with the blade extended. If the drill had binded when you were drilling the knife would have spun around cutting through your fingers. At the very least the blade should have been retracted and really the utility knife should have been clamped in a vice before drilling.

[charliejones]

...i keep stranded wire. 2ft long and over. Great for repairing wiring harnesses

[MrMadartist]

I've worked them to death, they work great be gentle with the neck pin. It will break 1st, I just cut the upper part off and keep using.