Build a Mini Motorcycle 200cc - 6.5HP with Super Big Wheel

Hello my dear friends, in this video I'm going to show you.Build a Mini Motorcycle 200cc - 6.5HP with Super Big Wheel. Thank you for watching!! Please subscribe to my channel.!
Thank you for watching your video. Please share your video to support me!
Love all of you :)
----------------------------------------------------------------------------
© Copyright by KST HACKS ☞ Do not Reup
----------------------------------------------------------------------------

#KSTHACKS #MiniMotorcycle #Build

[christopherromina]

U did a great job building this scooter

[areksuroboyoasli]

Idenya sudah bagus, mantap, hebat ...tapi sayang sekali besi hollow rangkanya terlalu kecil, tidak seimbang dengan kedua Rodanya, trus posisi kedudukan roda depan terlalu tegak, harusnya ada kemiringan sedikit, sayang sekali tidak menggunakan shockbreaker....salam kenal dari Indonesia.

[jktravel]

просто прелесть, такая кайфовая милаха! теперь хочется лета и на пляж на такой малютке, только как по мне редукцию стоит повысить, есть редуктор 1 к 2 на такомже типе сцепления и тяга лучше ну, а скорость так не для нее же все и

[hansonromero]

The fork pitch angle is too close to the frame…looks odd but otherwise awesome job!!!

[batscher]

Jo fängt ja schon gut an die Rohre im Gartenzaun biegen .😁die Vorderradgabel solltest ein paar Grad nach Vorne neigen das lässt sich besser Lenken .16:23 da würde ich keine Löcher Bohren das schwächt das material der Gabel . aber sonst hast du das gut gemacht , nur die Vorderradgabel hättest ein paar Grad vor setzen müssen wie bei einem Motorrad. 👍👍👍👍Tipp von einem Maschinen und Fahrzeugbauer Schiffsbauer.

[wesleyegreenfield]

Good job ! Don't let the hater comments distract you.. They probably don't know the difference between a nut and bolt..

[damirmarkac]

Beautiful idea and job .one little advice :you should make front fork at small angle so the wheel would be at slight angle and wheel would be away from engine/rest of bike

[slothzombi]

That's the most relaxed (boring) ride I've seen for sometime, and the goofy foot-down turn was odd. Put some rake on that front fork to get a leaning wheel.

[waynegilchrist]

You have some good ideas but you need to tweak some things for this to last and perform properly. Those heavy tires are going to strain the centrifugal clutch and it will probably burn out prematurely. Your rear drive sprocket is not properly centered on the shaft and has some up and down wobble. It's not that big of a problem if your speeds are less than 10 or 12 mph, (15 to 20 kph). Also that makes the likelihood of the chain coming off or catching your clothing. A chain guard would be a good idea. Your front forks should be raked forward for better steering and ride. I had to quickly scan through your video because I have somewhere to go and I don't remember seeing any brakes? Hope I'm wrong and good luck with your machine.

[Calthecool]

Maybe try a bigger sprocket on the rear wheel, or some kind of gear reducing jackshaft.

[fartenfreddy]

Cool machine! As others have said rake the front wheel forward for a more stable ride especially at any speed

[ВасилийЛукьянов-ся]

Наклон вилки передней маловат, небольшая ямка колесо уйдет под двигатель, а так всё классно.

[braydodo]

Oh my gosh, if I had the money and the focus to build this, I want to modify the design slightly and 3d print a shell to make this a light cycle from TRON. But that'll never happen... unless someone wants to take my idea and run wild with it :) (pls someone, DO!)
Edit: shoot I got so caught up in the idea I forgot to acknowledge the work KST put into this! Sorry man, and nice job when I first saw the animated thumbnail I was impressed with how you fabricated the curve leading to the front steering assembly.

[inhhai]

Xe này ông nào bị trĩ OK đấy .không có giảm sóc trước hoặc sau tối thiểu phải có một

[christopherromina]

Those two round piece of metal that you had cut and then you added another piece that has sharp points with a chain goes on to the other round piece was not cut perfectly circle when you were spinning it you can tell not sure if you saw it

[bomblifenewzealand]

Not much people will show custom making hubs and flanges. This is cool. Haters will hate but you made action over talk.

[shadreckchidambo]

I like your build sir I'm really impressed, but why did you weld the sprocket on the rear wheel at least you've used a sprocket holder for easy removing of the sprocket when it wears out

[АндрейЩигорев-цг]

Ну а чё ? На глазок , да примерно ... Вполне ожидаемый результат ! Для мини - катка сойдёт и так !!!

[marcosguedes]

Show de bola mais faltou uma proteção para a corrente.

[mitsche]

You need to put a shock absorber to both front and back wheel in order to bounce the body properly and the steering must not be fixed and above all the rear bearings must not be fixed to the housing for future change in case of distroyed parts.