Holley Boosters Explained

Показать описание

We show and explain Holley's most popular Boosters. Dont forget to like, comment, subscribe, and leave any question you have down below

Holley Carbs: How To's & Advice ,40 yrs of exp.

Рекомендации по теме

Комментарии

Great to have you back. Looking forward to the videos!

bicylindrico

I'm 66 years old and a lifelong hot rodder/drag racer. Thought I knew my share about Holley carbs until I saw your previous videos . You have an uncommon ability to explain in layman terms. And then you just disappeared leaving us all hanging ! Where you been, in prison ?....thanks for coming back.

timrayburn

Thank you for taking the time to make these videos. Seems to me that carburetors are making a comeback. Thumbed up and subbed.

m.a.p.hp

Thank you thank you!! For sharing this old technology!! I love holleys!! Love them!! It’s neat to learn more than what I know about them. I like that they have the least moving parts the better especially compared to the Edelbrock junk carbs.

fortnoxz

How do you alter the metering block to create more emulsion in the metering block?

cvanhoose

Thanks Randy for all your videos and explaining things the way you do. Do you have any videos on how to make something like a Holley Ultra XP 850cfm carb and modify it to make more CFM like 1100cfm or so? How do you go about doing that? I have a pair of short deck BBC 565cid's for offshore marine hi-perf boating...top end should see about 5800=6000rpm. I already bought the Ultra XP 850cfm carbs, but I think they're going to be a bit too small for my application and I know they can be modified to increase the CFM---I do not know much about Holley carbs, but I am learning quickly---Thank you, again. Mark

DuneWest

I have a 2008 production 4160 looking to upgrade the boosters do you have a part number that would take the guesswork out for me to install on the 4160

cloudchaser

I have 2 850 holleys on a 555 cid bbc With 6 71 suprcharger would like to put 750 throttle plates on them will it work??

ronaldsimons

man you have the best videos, im building a street strip small block with a tunnel ram . i have a pair of 1850 carbs can i epoxy the jets on the secondary plate and drill and tap it for screw in jets ?

mikecondoluci

on a progressive 2bbl I have 2 different booster sizes, does the smaller one go on the primary side? ones labeled a 509 and the other is a 555.

pishta

I picked up a 3310-2 today, noticed when I got home one of the front boosters melted. What caused that to happen? Also where can I get a replacement? Holley isn't carrying it anymore.

tiledave