Stud Walls Made Easy. Framing Trade Tricks ~ Orangery 6

Makita DHS661ZU 18V Li-Ion LXT Brushless 165mm Circular Saw

Festool sliding compound mitre saw KAPEX KS 120 REB 230V

Hilti GX 90-WF Framing Nailer

Roger and Dan assemble a stud pre-wall in the latest episode of The Orangery.

======================================
#StudWork #DanCox #TradeTricks

🛒 As an Amazon Associate, we earn from qualifying purchases

◾ Out of respect to our channel sponsors and the wide variety of people who watch our videos, we'll remove comments that do not follow common standards of politeness and decency.

[amazing]

Like Dan's way of working fixing all the 120mm studs first, then fixing the rest after. Always used to use this method especially on long walls so that the plasterboard fitted.👍👍👍

[robgullen]

I've got a variation on fitting the noggins - instead of a batten I use a block of the stud timber and trigger clamp - clamp the block to the stud, position the noggin - nail it in (with prepared nails or a gun) - remove clamp. No need for different lengths of batten

[peterwooldridge]

About time you started detailing how compliance with the Building Regulations is achieved!!

[Meutube]

I could have done with Dans noggin trick last year, excellent 👍

[LupusMechanicus]

Usually just left hand a sledge to backup a whackin, but that works too.

[WilliamPightling]

Great minds think alike Dan; I give the same tip (batten supporting the noggin whilst nailing) to my carpenter students at college.

[dominicmcc]

Excellent as always and a great tip from Dan👌👍

[alext]

6:00, Great tip. Never saw that. Wish I had. Damn, I'm stupid.

[micssticksnpipes]

Nice one Dan. Always good to hear opinions on a bit of kit

[thetallcarpenter]

Great video guys, and its clear that you have a good energy when you are all working together, which, as far as I'm concerned, gives the videos an extra dimension🤗That Hilti must be good for Dan to like it, as I know how much he adores his Makita🤣Cheers fellas

[johndoran]

Copyright infringement on the noggin stick tall carpenter has the YouTube rights on that 1 ! Great video Dan is the man 👍🏻

[TheNorthernmunky]

Brilliant job, need longer vids please 👍🏼

[vinnysurti]

Sometimes when making a framed wall we need to use our noggin….

[markhoulding]

Saw that little trick with the noggin staff on the Tall Carpenters channel fist chaps 🤔

[tylerar]

Love the channel and certainly the videos with Dan he is legit. I wonder though is all the lumber over there treated?

[fergalhopkins]

Dan is such a legend I'd say a gentleman to work with.
Rodger do you mind me asking are you still working full time or is skill builder your job now

[stephenwatson]

The Tall Carpenter does the same thing to get the height of the noggings

[timwyld]

I wonder if Hilti will do a product placement video on different lengths of timber to help with noggins?

[denty]

Nice job Dan, that hilti looks a nice weight too. Let’s hope it’s more reliable than the Paslode.

[ilijadjujic]

I purchased a senco sgt90i nail gun at the beginning of the year, it looks very similar to the hilti from looking at the video. Be interesting to see them side by side as the senco can be had for around £290 when on offer
That tip with the piece of timber holding the noggins in place I've done that from my very early days in carpentry, must of been shown that by one of the other carpenters I worked with