How to use a Maun Wad Punch Set

Maun. No Ordinary Plier Maker. Since 1944.
How to use a Maun Wad Punch Set.
Everything you need for cutting precise discs, gaskets, and washers.
How it works.
Use a wooden block as an anvil.
Screw the punch onto the handle. If making the washer, cut the outer diameter first.
Centre the hole to be cut on the spring - loaded plunger.
Strike the handle firmly with a mallet or hammer.
Now, lets repeat using a different material.
A perfect cut, every time.
If making a washer, now select a smaller punch to cut the inner diameter.
Place the spring-loaded plunger on the same spot to centre the two cuts.
Strike the handle firmly to create the finished washer.
Admire your new washer.
Available in 2 sizes.
Product #1000/1001
Metric 5mm to 32 mm.
Imperial ¼” to 1 “
Replacements in all sizes.

#HowTo #LeatherCraft #craftideas #crafting #punchtool #Maunindustries #Maun #Tool #toolhack

[messylaura]

great kit, would have loved a grub screw in the side to lock the center punch in the up position for a non point punch at times
any plans for other shapes like square dies?