DIY Arduino based 3D scanning machine | IR 3D scanner

Hello friends in this project I have made a 3D scanner machine, basically this machine have a sharp IR sensor which measure the distance between sensor and surface of object at every 1.8 degree angle in this way it takes 200 readings in 1 full turn of object then sensor itself lift up by 1 mm and again take 200 readings in this way a point cloud data is stored in memory card and the point cloud file then imported in MeshLab software and here we can convert into mesh and we can export it STL format also.

💻visit for more projects :-

This video is made for entertainment purposes only. Please use judgment, care, and precaution if you plan to replicate. WhatsApp for custom projects [phone]

[drewh]

The shown point cloud is *not* the scanned object - the scanned object has its mouth closed, the point cloud has its mouth open.
Also, the point cloud shown does not have points in layers as suggested by the time lapse, but the points concentrate radially in front of and behind the head, suggesting someone modeled it starting with a sphere primitive.

[SuperMakeSomething]

Cool build. I’m a bit disappointed that you didn’t credit the original build. If you could please link to my original video in the project description, I would appreciate it!

[chemistful]

Nice project even tho the point clowd you've obtained at the end is not the one from the object you've scanned, can be a little deceiving because it looks like you can get some killer resolution while in reality you can't

[Kienannnn]

Well made video and a neat idea, but the point cloud was clearly modeled from sphere primitives, not scanned (the ducks' bills don't even match). The disproportionate vertex density around the eyes and bill were an immediate giveaway as were the converging vertices toward the back of the head (exactly as a UV type sphere does). Not trying to expose you as a phony, but when you have over 100, 000 views on your videos, you should probably make them more convincing before everyone in the comments starts calling you out.

[doctorjana]

He is deceiving us. The one model he is scanning has mouth shut and the point cloud has mouth open because they are two different models. There is no way IR could get such detail. Atleast not yet.

[alfonsoforte]

En el scaneo el pato tiene el pico cerrado y en la toma de puntos el pato tiene el pico abierto, no es el mismo pato, salvo que la maquina tenga inteligencia artificial y detecte que el pato estaba hablando, estas publicaciones dejan mucho que desear y no le hacen bien al sitio.

[ssmodest]

Облако точек не соответствует реальному сканированию. Это видно невооружённым взглядом, облако построено из триангулярного файла 3D модели типа STL или подобного. Обман

[caape]

J'aimerais bien le VRAI nuage de point, pas un faux qui en fait est une modélisation ou on ne voit que les points. Le vrai résultat doit plutôt représenter une patate un peu diforme

[artsilk]

Это подделка. stl и облако точек полностью отличаются от отсканированной утки. Хорошо видно по клюву.

[stathistsekouras]

0.06 The yellow model in the middle has its mouth shut, but both Point Cloud and STL look different. How come?

[АлександрФедорищев-зо]

Это фейк
Сканировал утёнка с закрытым клювом
На 3d модели клюв открыт 😂🤣

[brianwayne]

What happened to your duck's lip and eyes' position?

You fooled most of dumb people
nice trick you worth it xD

[Sabretooth-jmkb]

Looks the same as the 3d scanner from electronoobs

[jobit_joseph]

Object that's scanned and the poin cloud are different. 😂😂😂😂. And you want us to believe that you archived that resolution from that sensor and 😂😂😂

[obama]

Вам срут в глаза, а вы довольны.
Сравните утёнка и полученную 3D модель - они разные.
ИК датчик расстояния подключен на вход потенциометра👍

[niniliumify]

I like the "Innovative" wire routing slots. Nice Job!

[paronaco]

Es una lastima que no muestre el verdadero resultado del escaneó, los modelos son diferentes y la nube de puntos no coincidente. Preferiría ver una nube de puntos mal hecha a que me quieren tomar el pelo

[tomasgozalvez]

Hello i've visited your web, but I can't see this proyect in there. Where could I see how you do it step by step, please?

[jaanusismael]

The focal distance of that sensor doesn't it disturb to make clear scan of parts?

[tcurdt]

That point cloud from that sensor? I believe it when I see the code and details on the sensor.