How To: TREMEC TKO/TKX will not shift when unboxed

preview_player
Показать описание
Sometimes in transit, the TKO's synchronizers will shift and become lodged, locking up the input shaft. Ben DeHaven, Silver Sport Transmissions' Tech Guru, is here to tell you how to easily correct this condition.
Рекомендации по теме
Комментарии
Автор

This was my problem, and fix. Annoying problem on a brand new transmission but easy to remedy.

justinsnow
Автор

Well one thing I noticed is that the transmission you have doesnt have a shifter installed....How does a transmission get bumped out of synchronization with the shifter installed?

One thing Ill recommend is everyone taking their shifter out and greasing the shift dogs and the end of the shifter rod that fits between the dogs and grease the springs that controls left and right motion as the double springs bind up being inside one another and the grease helps

Doing this process will make the pesky shifting problems non-existent until you actually experience clutch or slave cylinder issues down the road...

camtwo
Автор

I have a Cobra replica with a TKO600. I adjusted the clutch slave as I was getting slipping in high gears. Got back home after testing. Gear changes ok until I got home and now stuck in 1st gear as I tried to select reverse. Looks like this has happened as you have explained. Hope to access top of TKO through a hatch in tunnel. If when fixed then why is the clutch the possible problem. Many thanks. Ian.

mcartney
Автор

I've done this twice on my TKO-600. I have to pull it out of my Mustang each time. Is there a replacement spring or kit I should be installing so that I don't get stranded in traffic anymore or have to do this repair over and over?

Thank you for posting his video.

James

James_Musnicki