How to Diagnose Faults on Surron Light Bee X

How to Diagnose issues on your Surron Light Bee. Remember that the following items can cause your bike to not work..

A) Your Kick stand is down
B) Your electric brake cut outs may be active
C) You may be trying to throttle when the startup self diagnostics is not complete
D) You may have water in one of your bikes electrical connection plugs
E) Your topple over sensor is active (bike is tipped on its side)

See the Error Codes Document here:

[ErtiaAirsoft]

I was riding normal, stopped at a red light and had no throttle when light turned green. Bike has 995 miles. Plugged in the diagnostic attachment and it doesn’t light up at all

[tjwrongwaymead]

My bac4000 is flashing 2 slow single ones then 6 in a row. I have all lights but no throttle. It's just dead. Hall sensor ?

[patricktremblay]

My light is continuously on at all times! Everything works but no throttle! Hall sensor or controller blown or any ideas!

[justinstimpson]

I'm getting 3 flash controller Hardware overcurrent surge protection Er-207. Do you know exactly what this is?

[Kissimakyakalb]

Will the cable work if I cut the region brake and limiter cable

[bk]

Can u leave the light plugged in all the time?

[tjwrongwaymead]

Mines built with the 72/42 and the bac4000. Out of the blue I got no throttle. Thought it was done for. Tried restarting 10 times ready to give up then all the sudden it's good to go. Not sure what I did.

[full]

I have a bike that’s blinking 17 times, says motor temp sensor failure in the chart you provided, any tips on how to fix or reset this? I can’t adjust my regen braking because it keeps throwing the code

[LarsRudy]

What id your diagnostic cable doesn't produce a flash at all.
I also lost visual on my screen.
And now my bike is super unreliable works every 10 to 30 resets.
I also get jolty speed (especially in economy mode) and the newest fault my sport mode sometimes will only reach 60kmh

[redruMGeneration]

The red light on mine doesn’t turn on at all. And I’m stuck with regen, any help?

[kenseigler]

My diagnostic wire is just a soiled red light no blinking at on 3 diagnostic wires Sur Ron has never seen this I'm at a loss if you can point me in the right direction I would greatly greatly appreciate it

[Ishment]

I have the red light blinking 15 times. Apparently that means a short circuit from the throttle cable to the controller, do I just need a new throttle? Or is there a way I need to calibrate it

[srdghbuosfhb]

The red light on mine just stays solid, doesn't blink at all and there is no throttle response. There is power to going to the bike because the dash turns on, light turns on and I can charge my phone but no throttle response. I've tried a brand new throttle as well but the same issue; anyone have any ideas?

[stuchababe]

My diagnostic cable just keeps blinking red continuously every 2 seconds until I turn the bike off. And I cannot turn off regen I’ve tried everything! HELP

[kylerborden]

my asi controller says it's locked i have a bac4000 it turns on but has no throttle response any help?

[outoffashionn]

I have a issue with my Surron I installed a bac4000 on my x160 slowly it started to cut power when I would throttle it then no throttle would work, I swapped out the bac4000 and throttle it powers on but there’s no throttle response some please help

[pappasmirk.]

Any chance of getting a video on the vortex carbon pretty keen on it

[dannyholt]

I crashed mine other day was getting 45mph in sport mode out of it before crashed it after I got back on it it won’t go past 31mph on sport mode anyone help me out with whats happened

[toxicosam]

thx for the troubleshooting tutorial... i got a 22 blink after cutting and thermo tubing my kickstand wire and i was wondering why i had no more throttle. i had to reopen it and make sure the wire wasnt in contact with each other and thermo tube them back and it solved my problem.

[andreb]

Mine blinks once slowly and 4 times at a regular pace. My throttle doesn’t work. Can someone help me?