[LG Washing machine] - How to remove the transit bolts

This video shows how to remove the transit bolts of your LG washing machine.
Parts used are:
LG spanner (size 12). Alternately use a wrench size 12.
In case you need to transport the washing machine,
tighten the transit bolts with enough torque (13-26 Nm)!

[diankadesigns]

THere should be a warning label on the front of the machine to have these removed.

[Ogkusher]

Bro this video literally saved my LG i just purchased from getting ruind thank god i saw this video before i started my machines again before it did any big damage

[cdias]

It really should be clearer that these need to be removed before use, I used my machine a couple of times and the vibration/machine dancing around the place caused damage to the wall and sink next to it, please put stickers or something else on these bolts!!!! By the sounds of it lots of customers have not removed the bolts. Will the machine likely to be damaged if I used it 3 times with the bolts in?

[lulamanodumo]

Thank you so much i miss step and the machine was vibrating violently, God bless

[abrahamjoshua]

Something fell into the washing machine when removing the rubber. Can I still turn it on?

[melaniecapian]

I tested my washer and i did not remove the bolts, i tested for only a couple of minutes and it stated error, can this scenario damage the drain motor

[ewogap_]

hello, please.. is it necessary to use cover caps? my dealer threw it away during installation, thank you

[BradInStLouis]

When moving the washer to another home re-install the bolts (then uninstall after you arrive). Moving companies will typically install and uninstall the bolts for you (they will probably NOT disconnect the water, electrical and dryer vent hose.)

[GTexxClub]

The screws came out but the rubber is still stuck on the machine, how do i remove it?

[mujeebullahmahboob]

i started the machine without removing these four bolts. did it damage the machine or what problems can i cause.
now i removed the bolts but machine is having vibration, what should i do

[nanaowusu]

What happens if the transit bolt hole is not covered with the rubber cork?

[MangeshShinde]

What if I started the wash cycle accidentally, then I realised that I forgot to remove the bolts.. Is their any harm to the machine/drum etc.

[israelmendez]

I don’t get it why it need to be removed?

[alpinestar]

Where can I buy some of these transportation bolts

[almatania]

Do you know how to stop the smaller version of lg wash tower from shaking?

[The]

I’ve got all 4 of mine removed and it still bounces about

[cleggydadon]

i ran mine with these in then took them out should the drum spin freely looks as though it spins twice then instantly catches to stop it is that the mechanic or have i broke it?

[martik]

How can I move this without damage if I do not have the bolts and I need to move it on it's side or back?

[MrHamzawy]

I have didnt remove the plastic bolts . And try to using my washing machine 4 or 5 times and the tube didnt move and show le problem. Then i removed the 3 screw and also the same
What i can do ?

[hemiv]

are the bolts the same size in all washing machines? and what size are they in mm? thanks