Backup Parking Sensor installation guide

This is a step by step guide on how to connect all the all components that come with a front and rear parking sensors system

The basic process is:

1. Place the brain in a convenient spot in your trunk

2. Drill the holes for your bumper, pop in the sensors and thread the wires and plug in to the brain.

3. Place the sensor display or speaker in the desired location of your dash (leave a little slack so that you can adjust it if needed) and thread it to the trunk

4. Plug in the power harness to the brain and connect it to a constant power source.

5. Hook up the yellow and white trigger wires to the reverse and break lights and your finished.

If you would like to purchase a sensors system like you saw in this video or if you need more technical support click here:

For more information or assistance on buying this product

[Make_It_Yourself_DIY]

This is the best clear video I even seen about the wires connection, well done

[expertlinkautoaccessories]

EXCELENT JOB. VERY CLEAR EXPLANATION, ANYBODY WHO FOLLOWS THIS CAN FIT PERFECTLY.

[hamid]

This device is correct and useful when the sensitivity of the front sensors is about 20 cm, otherwise, in heavy traffic, the sound of the device will disturb the passengers of the car, because the distance from the cars in front is about 50 cm in traffic, but when parking that the front bumper of the car may rub against an obstacle.

[Bluegreenred]

Hi, I got mine on Amazon for back sensors and it looks very similar to the one you reviewed in this video. And I hope it will work great because it does require drilling in the back. 🙏🙏

[Life-n-Fun]

Thanks dear ...It was very nice and easy explain from your Thankfullll

[dondada]

Would installing rear parking sensors overload the reverse circuit, considering that some vehicles already have a backup camera or an aftermarket camera installed?

[alexhalterman]

Tis video answered all the questions that have except one. What is the maximum distance that it picks up? I do not want to sit at a red light with a vehicle 3 to 4 feet infront of me with this going off?

[RicardoSuarez-xubu]

Check the video that you have a contradiction between the yellow wire and the white wire. yellow is reverse and white is brake

[nickhall]

It all makes sense apart from connecting the front sensors,
Surely if I connect the fronts to my brake lights they will will work when I press the brake? As the brake lights aren't always on?
Surely the front sensors need a constant power source to? Thanks

[aravindia]

My front sensors wont work all the time. May be something to do with electric regenerative power, it won't give 12v to brake light. When I put reverse gear and immediately drive mode it works otherwise it wont work even front is a car. It is just hit and go.
I am thinking connect white wire to red wire so that it gets 12v all the time and senses distance whenever something come front. Display will be on all the time, my guess. Any suggestions please?

[swavston]

Hey, good job there, can you tell me how to replace one of those sensors

[hodsonmotors]

Can I use your kit with OEM back up sensors? I have an F150, with a rear bumper that already has the sensors installed, but the truck doesn't have the back up sensor system. Looking to use the OEM sensors but with an aftermarket system.

[kevinrogahang]

I think the white wire is for the break light. And the yellow one is for the reverse

[abdihassanabdi]

Hi again so do you mean (black and red and white ) I have to connect from rear brakes
And yellow one I have to connect to plus to reverse????

[vasili_pasioudis]

Can this be used as proximity/driving sensors to improve safety, by having all 8 sensors ON and connecting it to a switch to trigger (turn on/off) manually. How would one wire this.

[hazlbri]

I'm wondering: if you put 2/4 sensors at the rear activated by the reverse, how could you activate 2/4 sensors installed on the front ? Obviously not with the brake or reversing light? It perhaps needs to be incorporated into the gear shift ?

[panospanagakis]

hello, can the beep of monitor been redused?it is too loud..thank you

[odaddinson]

Can it be installed on an ML350 W166 with a backup camera?

[ruslanbeletei]

Many thanks mate for your video and your help!!!

[SmartcadSoftwareSolutions]

This is what I was looking for

Unfortunately this product is not available on Amazon...