Wireless Backup Parking Sensor installation guide

This is a step by step guide on how to install a wireless parking sensor system in the front and rear for any car.

If you haven't yet purchased this system click here to buy:

The system in this video is perfect for parking, backing up, and parallel parking.

Very easy to self-install and Tadibrothers gives you all the components needed to make the installation clean and reliable.

If you already have one of our systems here is what you need to do:

1. Place the display or speaker in the desired location (i.e. in front you’re your steering wheel or above your mirror)

2. Connect it a 12-volt power source (usually found under your dash)

3. Place the “Brain” of the wireless sensor system in a convenient location in your trunk (keep in mind that the sensor cables will feed into that box)

4. Install the sensors by distributing them evenly across your bumper and use the included drill bit to make holes in the vertical center of the bumper

5. Connect the brain to constant power source (red and black wires)

6. connect the triggers to the reverse and break light (White and White/Black)

For more tech support or assistance on buying this product

[CharlieDErcole]

Where or what is the constant power source for the red cable??? Black is ground, white is for the brake and reverse is the mixed coloured. Help!

[vlratcliffe]

Hi on my set up the red wire is my acc ...ALSO its my reverse light so do i wire the yellow an red cable together . Cheers

[abc-yqio]

Good video. What is the maximum distance between brain and display?

[robertdrinnon]

Yes this is Robert grinning and I'd like to know how much the force the eight sensor unit is

[Mrfahadaslam]

What if vertical spot on bumper is below 18”? Can the system continue working?
Also what is the minimum height of obstacle that these sensors pick up?

[k.mathijssen]

What is the average time of installing front and rear?

[achraftalei]

does the right side of the display shows the distance of rear sensors and the left side of the display shows the distance of front sensors?

[cabji]

Is there any way to mount a product like this on an alloy track back vehicle (aka "ute") and it still operate correctly?

[ghazibagazi]

What do you suggest for front 2 or 4 ?

[k.mathijssen]

And how is it doing in bad weather such as heavy raining?